Rocket Racing Wheels Injector Series 15X8 Wheel, 5x5 BP, 3.75 BS
Universal Fit, 15 Inch Wheel Diameter, Aluminum, 8" Width, 5x5 in. Wheel Bolt Pattern (in.)
- Wheel measures 15" in diameter and 8" wide
- Features 3.00" hub clearance under center cap
- Each wheel is rated for 1560 lbs.
- Made from aluminum and offered in a raw or polished finish
- 5x5" bolt pattern
As soon as the Rocket Launcher Series "front runner" wheels were released, there was an overwhelming response from hot rod enthusiasts. They urged Rocket to craft a hardcore traditional hot rod wheel that could be mixed or matched for the perfect big and little combo. The Rocket Scientists accepted the challenge and set out to create and revive a classic from the '60s.The Rocket Injector Series wheels are sculpted to perfection and hold true to the golden age of Detroit automotive performance.
The Rocket Injector will be available in Fully Polished and Full "As-Cast" finishes. **As Cast Finishes may vary slightly.1-pc Cast Aluminum A356 As Cast - Rear Wheel Drive Offsets - Polished Aluminum Snap-in O-Ring Cap Included - Lug Centric - Standard Conical Seat 60 Degree Lugs sold separately - 3.00" hub clearance under center cap - Load Rating 1560 lbs per wheel - Reverse Mount. RPM is committed to producing cutting-edge alloy wheels through performance and innovation with the highest quality standards to enhance the performance and appearance. The ultimate result is that your ride will get noticed at the next cruise-in or car show. To better serve the market, RPM designers and engineers carefully chose better backspacing and offsets to fit on more specific types of muscle car, street rod, hot rod applications.
**Fitment Note** - The Injector was designed to be used on traditional hot rods and muscle cars with drum brakes. Due to the soft lip design of the Injector, disc brake fitments can be a concern. The reverse-mount nature of a soft lip wheel moves the drop center to the rear of the wheel which decreases rotational clearance. The rotational clearance of the Injector is 6.35" from hub center to the drop center of the wheel. Please be sure to double check your disc brake clearance before ordering. See our measurement guides under the customer service page for more information on how to measure brake clearance.
- CAST (As Cast) - As-cast aluminum center with a machined outer lip
- POL (Fully Polished) - Fully polished centers and rims
- This item ships directly from the manufacturer. It may take an additional 10 business days for Rocket Racing Wheels to ship this item.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
Q & A
Learn how to measure offset, torque specs, design, and other wheel basics. Our racing wheel guide covers all you need for a new set of oval track wheels.
Speedway Motors and Classic Trucks teamed up to build a 1952 Chevy truck in honor of Speedway Motors' 65th anniversary. Speedway Motors reached out to Rocket Racing Wheels for a set of their “Booster” Wheels to function as rolling stock for the build.
Tim shows some of our Rocket wheels and knockoff hub covers.
Our new 383 engine gets installed in the '32 Roadster. We also update the steering wheel, shift knob/adapter, and wheels and tires. It's got some real 1960's flair now!
Reference this old tire size conversion chart to equip your old car or truck with modern radial tires. Our tire fitment guide covers a variety of tire types and sizes.
Roadster Expert Tim covers the various types of vintage wire wheels (1928-1935) found on early Fords and how to distinguish the differences between them.
Speedway Motors employee Jess M. talks about the Rocket Racing Deep Angle Spinner Knock-Offs she installed on her 1933 Ford 5-Window Coupe.