Hyperfuel 40004 Fuel Command Center 2 EFI Fuel Pump

The Command Center 2 is the ultimate answer to fuel system simplicity! Designed to be used in vehicles with stock fuel tanks converting from carburetor to EFI. The Command Center 2 eliminates that problem. Complete new design from years of testing has resulted in the most effective system anywhere. The pump in the Command Center 2 never gets uncovered because it receives a steady supply of fuel from your existing fuel system. So your system maintains a constant flow of fuel. The built-in regulator eliminates the need for an external regulator. Since the Command Center 2 is constantly circulating fuel to and from your tank, your fuel pump stays cooler and will have a longer life. The fuel pump noise is also muffled by being submerged in fuel 100% of the time. The Command Center 2 is the best way to provide the necessary increase in volume when adding a power adder such as boost or nitrous to your engine. So, whether you are racing, off-roading, or just cruising, this “compact” external fuel assembly is your all in one solution.

• Capable of delivering enough fuel for up to 800hp
• Maintains a 1.5 Liter (0.4 Gallons) reservoir of fuel in the module at all times
• Single High Volume Flex Fuel 340 LPH pump is compatible with any EFI system
• -6 AN fittings and Buna-N O-rings used for easy installation and durability
• Precision machined billet aluminum tank
• A submerged pump runs cooler than an external pump
• A low fuel level in the fuel tank will not result in pump starvation when vehicle is on a steep incline
• Eliminates rigging costly EFI quality inlet and return lines for your fuel system
• Every Go EFI System is available with the Command Center 2 as an option
• Compatible with any other competitive aftermarket or factory EFI installation
• Compatible with E-85 gasoline and alcohol or methanol based fuels

Features

• Main assembly w/ 340 LPH fuel pump, regulator, pressure gauge
• 5ft high-pressure hose & -6 AN fitings to connect main assembly to throttle body
• Hyperfuel high-flow 30-micron EFI fuel filter
• Return fitting and seals

• Weight - 8 lbs
• Dimensions - 4.5" Diameter x 9.5" tall w/out gauge, and 10.5" tall w/gauge

• Weight - 8 lbs
• Dimensions - 4.5" Diameter x 9.5" tall w/out gauge, and 10.5" tall w/gauge

Installation Instructions (PDF)