Menu

Shop

Garage

Cart

Account

Product Summary

67-72 Chevy, 67-72 GMC, EFI Conversion Fuel Tank Style

  • The 19-185 fuel system kit is designed for the 1967-72 Chevy/GMC trucks. This fuel tank mounts under the truck bed using the flanges to bolt in place
  • Tanks are galvanized steel then powder coated silver for total corrosion protection
  • 255 LPH fuel pump with hanger assembly gives you the fuel you need with in-tank quietness
  • Sender has 1/4" NPT Supply and Return line ports for easy fuel line connection and a barbed vent fitting
  • Fuel level sender included with the correct Ohm range for your factory gauges

Key Specs

MFG. Part #19-185
BrandHolley Sniper
Fuel Tank StyleEFI Conversion
Fuel System TypeEFI
Capacity18 gallons

Need To Know

Quick and Easy Returns

Return Policy

Details

The 19-185 fuel system kit is designed for the 1967-72 Chevy/GMC trucks. This fuel tank mounts under the truck bed using the flanges to bolt in place. The tank is designed to bolt up to the bottom side of the frame rails but it can be mounted in different configurations including on top or even in-between the rails in some cases. It is up to the installer to drill and locate the mounting holes. Mounting hardware is not included.

The fuel filler neck will go up through the bed floor. You can purchase the optional 19-186 Side Fill Kit to mount fuel filler on the bedside.

The kit includes the tank, a 255 lph fuel pump, internal baffling, and a fuel level sender. The tank is powder coated for corrosion resistance and great looks.

18 gallon capacity

Supports up to 550 EFI (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw)

Size is 32-1/4" x 20-1/2" x 9-3/4" (including the mounting flange)

Size is 28" x 20-1/2" x 9-3/4" (measured without the mounting flange)

Features:

  • Tanks are coated galvanized steel then powder coated silver for total corrosion protection
  • 255 lph fuel pump with hanger assembly gives you the fuel you need with in-tank quietness
  • Sender has 1/4" NPT Supply and Return line ports for easy fuel line connection and a barbed vent fitting
  • Fuel level sender included with the correct Ohm range for your factory gauges

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

Specifications

KEY SPECS
MFG. Part #19-185
BrandHolley Sniper
Fuel Tank StyleEFI Conversion
Fuel System TypeEFI
Capacity18 gallons
GENERAL
Fuel Capacity Range15.00-19.99 Gallons
Material TypeSteel
FinishPowder Coated
ColorSilver
Sending Unit IncludedYes
Ohm Range0-90 Ohms
Fuel Pump IncludedYes
Filler Neck IncludedYes
Tank Straps IncludedNo
Hardware IncludedNo
Overall Length32.25"
Overall Width20.50"
Overall Height9.75"
Inlet Fitting1/4" Female NPT
Outlet Fitting1/4" Female NPT
Free Flow Rate67 GPH / 255 LPH
Sold in QuantityKit
GTIN Code090127105122