Holley 300-601 Dual Fuel Injector LS1 Lo-Ram Manifold Base
LS1 Chevy LS V8, EFI Fuel System Type, Multi-port Injection Style, Lo-Ram Intake Manifold Type
DUAL FUEL INJECTOR LS1 LO-RAM MANIFOLD BASE
Top-feed Dual Injector manifold and fuel rail kit
The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III and IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifold and rail kits will work with OE (Original Equipment) or aftermarket cylinder heads.
The 300-601 & 300-601BK front-feed, base-lower intake manifold provides two injectors per cylinder for hi-volume fuel demands, flexible fuel supply strategies, and dual-fuel capability. Offering this base intake manifold with fuels rails separately allows you to select your components individually as you build your induction system. Complete top-feed manifold kits are also available with dual fuel injectors, see P/N's 300-624 & 300-624BK. The top-feed, short runner, low-profile base intake manifold was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds. Top-feed throttle body tops are available as a machined casting 300-246 & 300-246BK which are configured for a 105mm throttle body, see Holley P/N 112-581 or similar models. The fuel rail kits come with two sets of brackets. A set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors.
Holley Lo-Ram intake manifold kits include all the sealing o-rings, plugs, and fasteners required for the installation of the kit.
Instruction Sheet (PDF)
- This item ships directly from the manufacturer. It may take an additional 5 business days for Holley to ship this item.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
Q & A
Dave gives a few tips on how to select the appropriate intake manifold for your project.
Tim talks about the Offenhauser 4 x 2 Pacesetter intake.
Tim talks about his favorite intake manifold, the Might Edelbrock X1.
Tim talks about the new Edelbrock powder coated cylinder heads and provides a little history on Federal Mogul heads.
Speedway Motors Product Manager Jeff K. talks about how to really make your engine bay stand out from the crowd with just a little patience, and some Speedway products.
Information of the function of intake manifolds and a little information on how to choose the right one for your rebuild.
Learn how to upgrade your stock Chevy 350 or Ford 302 for peak performance with bent exhaust systems and more. Don't settle for stock in your crate engine.