Holley 300-123 LS Hi-Ram EFI Manifold
Chevy LS V8, EFI Fuel System Type, Multi-port Injection Style, Hi-Ram Intake Manifold Type
- This item ships directly from the manufacturer. It may take an additional 2 business days for Holley to ship this item.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
HolleyDAYS are here again! SAVE up to 20% on this part and hundreds of other Holley brands during the 2018 HolleyDAYS sale 11/15/18-12/31/18.
The Holley GM LS1/LS2/LS6 Modular Hi-Ram Intake Manifold is introduced as a cost effective alternative to fabricated sheet-metal for high-performance applications where induction system height is not limited. Coupling this Hi-Ram intake with the high flowing LS1/LS2/LS6 style cylinder heads has outstanding potential for N/A and forced induction applications at a budget-minded cost. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! The base is designed to be modular in configuration to accept a wide range of carbureted and EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations EFI fuel rails are machined for -8AN O-ring Fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. Cast aluminum construction. Intended for use on N/A or forced induction engines in the 6.0 to 7.0+ liter range, max power at 7000-8000+RPM.
- Base Plenum Top Mounting Flange Height - 8.42 to the lifter valley cover flange on engine block.
- Total Height with 92/105mm EFI Plenum Top - 12.32 to the lifter valley cover flange on engine block.
- Runner Length - 6.58 , As-Cast Runner Cross-Sectional Area - Tapered 4.25 in² to 2.53 in²
- Throttle Body Flange Location, with 92/102mm EFI Plenum Top : Height - 8.42 (from engine block lifter valley cover flange), Longitudinal Location - 3.84 (forward from engine block front flange), Angle - 25 deg. (down from vertical)
- Plenum Top Gasket Type - 3/32 Round O-ring Cord
- Mounting Flange Gasket Type - Standard LS3 Molded O-Ring
- Port Size - 2.49 Height x 1.21 Wide
More Like This
Holley 300-122 LS Hi-Ram EFI Manifold
Holley 300-122BK LS Hi-Ram EFI Manifold, Black
Holley 300-123BK LS Hi-Ram EFI Manifold, Black
Holley 300-128 Mid-Rise Intake, GM LS3/L92 w/105mm Top
Holley 300-129 Dual Plane Carbureted Intake - GM LS3/L92
Holley 300-130 Dual Plane Intake - GM LS1/LS2/LS6
Holley 300-131 Carbureted Mid-Rise Single Plane Intake Manifold
Holley 300-137 Mid-Rise EFI Intake Manifold Kit
Holley 300-218 Hi-Ram Manifold Top
Holley 300-219 Hi-Ram Manifold Top
Q & A
Tim talks about the Offenhauser 4 x 2 Pacesetter intake.
Dave gives a few tips on how to select the appropriate intake manifold for your project.
Tim talks about the new Edelbrock powder coated cylinder heads and provides a little history on Federal Mogul heads.
Tim talks about his favorite intake manifold, the Might Edelbrock X1.
Now that Project Chevelle is making some real power, we've decided to ditch the old tank, lines, and pump in favor of a new tank and pump from Tanks Inc.
Speedway Motors Product Manager Jeff K. talks about how to really make your engine bay stand out from the crowd with just a little patience, and some Speedway products.
Information of the function of intake manifolds and a little information on how to choose the right one for your rebuild.