Holley 12-925 HydraMat Fuel Pickup, 30 X 14 Inch, Road Course or CT
Universal Fit, 14" Overall Width, 30" Overall Length
- This item ships directly from the manufacturer. It may take an additional 2 business days for Holley to ship this item.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
HolleyDays INSTANT REBATE. Select Holley, MSD, Mr Gasket, Earl's Performance, Demon Carburetion, Weiand, Lakewood, Superchips, Diablo Sport, RacePak, Hooker, NOS, Flowtech, Frostbite Performance Cooling, Mallory Ignition, STS Turbo, Hays, Accel, Quick Time, Edge, Quick Fuel, Anvil, Bright Earth, Flowmaster, Hurst, B&M, APR, Dinan, XDR discounted up to 10% through December 31, 2019.
Holley introduces its line of amazing patent pending HydraMat fuel pickups that solve the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the perfect solution to this problem!
Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity.
- For road course or circle track applications
- 30 inch length
- 14 inch width
- Side and center outlet pick-up with -10 AN male fitting
- Rectangle shape
For best performance, the return fuel should be discharged near the pick-up of the HydraMat at a minimum distance of 1 inch above the mat.
Mat should be installed with the side fitting on the "passenger" side of the vehicle. If the intended use is road course, cap the side fitting and connect to the center fitting. If intended use is circle track, cap the center fitting and connect to the side fitting.
Not compatible with Diesel fuel, Methanol or oils.
This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles.
Hydromat Instructions (PDF)
Hydromat Selection Guide (PDF)
More Like This
Holley 12-924 HydraMat Fuel Pickup, 30 X 14 Inch, Circle Track
Holley 16-110 HydraMat Fuel Pickup, 30 X 14 Inch, Universal
Holley 16-121 30 x 14 Inch HydraMat, Rectangle with Notch Out
Holley 12-132 In-Tank Retrofit Fuel Module, 450 LPH
Holley 16-101 HydraMat Fuel Pickup, 15 x 8 Inch, Cross
HOlley 16-105 HydraMat Fuel Pickup, 15 X 3 Inch, Rectangle
Holley 16-203 HydraMat Install Magnet Kit, 4-40 Thread
Holley 16-103 HydraMat Fuel Pickup, 8 X 8 Inch, Cross
Holley 16-104 HydraMat Fuel Pickup, 11x11 Inch, Cross
Holley 16-100 HydraMat Fuel Pickup, 15x15 Inch, Cross
Q & A
We take a look at some parts going into a 1951 Chevy Truck project. We highlight a few key pieces including the 1947-1954 Chevy Truck EFI Fuel tank.
Pat talks about our Tanks Inc. EFI fuel tanks.
Now that Project Chevelle is making some real power, we've decided to ditch the old tank, lines, and pump in favor of a new tank and pump from Tanks Inc.
Speedway Motors and Classic Trucks built a 1952 Chevy truck in celebration of the 65th anniversary of Speedway Motors. Check out the short video on one of the products used in the build.
Check out episode 9 of our 410 Sprint Car Build series! Today, the guys are having some fun with the fuel system.
In this episode, Project Chevelle takes a big step in its muscle car transformation. It's out with the little old 307 and to the dyno with our new 383 from BluePrint Engines!
Now that Project Chevelle is making some real power, it's time to give it a little more fuel. Follow along as we install a new tank and pump from Tanks Inc.