Hagan Street Rods 90 SQ 90 Curve Series Fuel Door, Square
Universal Fit, 5.25" Overall Height, 6.50" Overall Length, 2.81" Depth, Steel, Natural
Now you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.
Includes: housing, door, hinge, latch, gas cap, spout and install instructions. It can be installed in steel or fiberglass panels. Door is 3-1/2". It's most common use is in the panels with a slight curvature like the quarter panels of most cars and trucks from the 1920's through cars of today. This part has a radius of 32 inches. The top is made of 18 gage mild steel. The spout is 2" o.d. and 3-3/4" long. Hinge is spring loaded to hold the door open and closed. Latch is spring loaded and magnetic. Part comes with spout, cap and pictured instructions.
NotesIncludes 3.00" long, 2.00" O.D. steel tube. Height of the crown of the curve is 2.81", height of the sides of the curve is 2.63"
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
Q & A
Speedway Motors employee Pat joins us once again. This time Pat is talking to the Model A and Model T owners, specifically in regards to Moto-Meters and accessories.
Tim talks about the grille shells & inserts we have to offer.
Speedway Motors employee Pat O. discusses some of the expanding carpet and interior accessories selection available at Speedway Motors.
Expert techs Austin and Pat talk about some of the race car body parts we have to offer and the aerodynamic benefits they can add to your modified.
Learn about the defining differences between 1933 and 1934 Fords, including interior and exterior differences.
Learn about the importance of getting the chain tension set correctly, and why it is critical that we get it as near perfect as we can. Walkthrough a basic procedure that effectively and consistently gets the chain tension set properly every time.
Do you have a collection of decals? Here's a step-by-step process of how to turn them into reuseable magnets! This is a DIY project that takes minimal time.