HOlley 16-105 HydraMat Fuel Pickup, 15 X 3 Inch, Rectangle
Universal Fit, 3" Overall Width, 15" Overall Length
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
HolleyDAYS are here again! SAVE up to 20% on this part and hundreds of other Holley brands during the 2018 HolleyDAYS sale 11/15/18-12/31/18.
Holley introduces its line of amazing patent pending HydraMat fuel pickups that solve the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the perfect solution to this problem!
Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity.
- 3/8" NPT fitting size
- 15 inch length
- 3 inch width
- Center outlet
- Rectangle shape
For best performance, the return fuel should be discharged near the pick-up of the HydraMat at a minimum distance of 1 inch above the mat.
HydraMats with a female NPT thread do not require the use of a sealing paste or tape. Use of a sealing paste or tape could result in fuel pump failure.
This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles.
Hydromat Instructions (PDF)
Hydromat Selection Guide (PDF)
More Like This
Holley 16-108 HydraMat Fuel Pickup, 8 X 3 Inch, Rectangle
Holley 16-102 HydraMat Fuel Pickup, 15 X 8 Inch, Offset Outlet
Holley 16-107 HydraMat Fuel Pickup, 15 X 15 Inch, Square
Holley 16-109 HydraMat Fuel Pickup, 24 X 15 Inch, Rectangle
Holley 16-101 HydraMat Fuel Pickup, 15 x 8 Inch, Cross
Holley 16-100 HydraMat Fuel Pickup, 15x15 Inch, Cross
Holley 12-130 In-Tank Retrofit Fuel Module, 255 LPH
Holley 12-131 In-Tank Retrofit Fuel Module, 255 LPH
Holley 12-133 In-Tank Retrofit Fuel Module, 450 LPH
Holley 16-106 HydraMat Fuel Pickup, 11 X 11 Inch, Square
Q & A
Now that Project Chevelle is making some real power, we've decided to ditch the old tank, lines, and pump in favor of a new tank and pump from Tanks Inc.
Speedway Motors employee Pat O. is back with Dave's 1951 Chevy Truck project to talk about the 1947-1954 Chevy Truck EFI Fuel tank available from Speedway Motors.
Pat talks about our Tanks Inc. EFI fuel tanks.
In this episode, Project Chevelle takes a big step in its muscle car transformation. It's out with the little old 307 and to the dyno with our new 383 from BluePrint Engines!