Garage Sale - HANS Device Sport Series w/ Quick Click Anchors, 20 Degree, Medium
The HANS device stands for Head and Neck Support. It was designed with you and your family in mind. The goal in racing is to go faster than anyone else on the track and cross the finish line first. And as technologies increase speeds, it also increases the risks. Remember, you a have a family to go home to when the night of racing is over.
The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Sport Series weighs approximately 2.25lbs. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.
The injection molded super structural gives the same protection as the Pro Series. It weighs about 2.25lbs but has a more attractive price.
Hans Device Sizing Chart (Link)
Anchor Instructions (PDF)
SFI Recertification Notice (Link)
NOTE: These items will only be shipped to an address in the US, Canada and Mexico.
This HANS device is garage sale priced because it has been discontinued.
NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS
To select the HANS device for you, you will need to know a couple of things:
1) What degree of angle is your seat?
- The most common are: 0-10 degree (upright & many sprint cars), 20 degree (most common, modifieds, stock cars, sprints), 30 degree (200lbs or more)
2) What does your neck measure?
- The most common are: Medium (13.5"-17"), Large (16"-20")
SpecsTorque Specifications for HANS Device Fasteners
Detailed torque specification for HANS Device anchors and tether carriers
(A) Helmet Anchor Torque Specifications
QUICK CLICK ANCHOR
Torque specs for the QC screw are:
30 Inch Pounds (in-lbs) OR
3.4 Newton Meters (N-m) which is similar to:
Finger tight plus one quarter turn additional.
(B) Tether Clamp Torque Specifications
FIXED TETHER CARRIERS
Torque specs for the screws holding the metal fixed tether clamps are:
20 Inch Pounds (in-lbs) OR
2.25 Newton Meters (N-m)which is similar to:
SLIDING TETHERS CARRIERS
Torque specs for the screws holding the orange sliding tether carriers are:
8.0 Inch Pounds (in-lbs) OR
0.9 Newton Meters (Nm) which is similar to:
- This product is discontinued.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
More Like This
HANS DK14237.411 SFI Device Sport III Series Quick Click Anchors
Hans DK 16217.321 SFI Youth III PA SA Head & Neck Restraint
HANS DK14237.311 FIA/SF Hans Device Sport III Series Post Anchor
HANS DK14247.311 FIA/SF Hans Device Sport III, Post Anchor 20 Deg
HANS DK14247.411 SFI Hans Device Sport III Quick Click, 20 Deg, L
Hans DK 16217.421 SFI Youth III QC SA Head & Neck Restraint
Simpson Racing Hybrid Sport Head and Neck Restraint, Sliding Tether
Simpson Hybrid Sport Head and Neck Restraints
Necksgen REV2 Lite Head & Neck Restraint System
Zamp NT006003 Z-Tech Series 6A Head and Neck Restraint
Q & A
The HANS Device has proven to save the lives of racers time and again. We'll show you how to select the right HANS Device for your specific needs here.
Tim talks about the new SA2015 helmets and what we have to offer.
This guide explains what a Snell certification is and the difference between a Snell SA2015 and SA2020 helmet.
Jason Martin is in the pits at 305 Racesaver Nationals talking to racers about topics they would like more information on. Watch this video to learn how to install a fire suppression system to help keep you safe!
EMi Employee Frank and Speedway Motors employee Jeremy demonstrate how to properly measure for a race suit.