|
#6174837
Gotta Show 131151 1965-79 Braided GM Power Steering Hoses
- Has a 11/16"-18 inverted flare pressure line fitting
- Includes a 5/8"-18,(3/8-18 NPT) inverted flare return line fitting
- Built specifically for the 1965-1979 GM car & truck boxes with flare fittings
$199.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, 5/8-18 FLARE Thread Pitch
- Has a 11/16"-18 inverted flare pressure line fitting
- Includes a 5/8"-18,(3/8-18 NPT) inverted flare return line fitting
- Built specifically for the 1965-1979 GM car & truck boxes with flare fittings
- Lines have a total of 30" in length but can be shortened to desired length if needed
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyGotta Show 131151 Details
Gotta Show 131151 Details
These stainless steel braided power steering hose kits allow you to fit them to most 1965-1979 GM car & truck boxes with flare fittings.
- 11/16" inverted flare pressure line fitting
- 5/8" inverted flare return line fitting
- 30" line lengths (can be shortened)
Item Details
with Flare FittingsCharts
Features
Please direct all questions regarding installation to the manufacturer before cutting any hose. The manufacturer’s phone number and website contact information are listed in the instruction sheet.
Guides & Documents
Warranty Information
Click for details
Warranty Information
Click for details
Gotta Show 131151 Specifications
Gotta Show 131151 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 131151 |
| Brand | Gotta Show |
| GENERAL | |
| Sold in Quantity | Each |
| Thread Pitch | 5/8-18 FLARE |
| Thread Pitch (2) | 11/16-18 FLARE |
Ratings & Reviews
4.7
16 Reviews
Customers commend our product for being the only one adaptable to tight fitting scenarios, particularly in classic cars like the '68 Camaro and '57 CJ5. The pre-fitted tight bends and flexibility of the hoses earned high marks. Many shoppers stated they would buy again, thanks to the practicality and excellent fit. It improved the overall look of their engines, providing a quality finish and classiness. Its easiness in installation and being a great option for customizing hoses were noted as distinguishing features. But, it's pointed out that the hoses have to be cut to length. Nonetheless, overall, the product impressed with high quality and perfect fits.
Ratings & Reviews
4.7
16 Reviews
Customers commend our product for being the only one adaptable to tight fitting scenarios, particularly in classic cars like the '68 Camaro and '57 CJ5. The pre-fitted tight bends and flexibility of the hoses earned high marks. Many shoppers stated they would buy again, thanks to the practicality and excellent fit. It improved the overall look of their engines, providing a quality finish and classiness. Its easiness in installation and being a great option for customizing hoses were noted as distinguishing features. But, it's pointed out that the hoses have to be cut to length. Nonetheless, overall, the product impressed with high quality and perfect fits.
4.7
16 reviews
5
14
4
1
3
0
2
0
1
1
Most Liked Positive Review
5.0
Excellent Product!
I purchased these hoses for my '69 SS 350 Camaro Resto-mod and they fit great! A nice touch to clean up the engine compartment and replace the much lesser quality original OEM hoses. There are not a lot of mostly complete SS braided power steering hoses as a part replacement available unfortunately. This is a great option for customizing your hoses. Unfortunately they do not come pre-cut and assembled completely and have to be cut to length which can be a little difficult.
Most Liked Negative Review
1.0
Big problem
Unable to screw when the braided hose inside. And after grinding and checking first raising of pressure and hose is blowing !
Filter by Ratings
I would definitely recommend this
5.0
5 months ago
Buddy
Watertown ct
Verified
Was just as described, easy to install worked great
Would Recommend
Only P/S line that fits so far
5.0
3 years ago
LL 68
Des Moines, IA
Verified
Hooker 2285 Headers 2 1/8" in 68 Camaro put the #5 tube against the P/S line. With the close 90 degree bend of the Gotta Show line it barely fits. Other fittings wouldn't fit at all. The braided line is very nice looking. Unfortunately, I won't be able to hook up the other end of the line for a while. The engine has to be removed to have the headers coated.
Would Recommend
Nice hoses for the early GM Saginaw box
5.0
3 years ago
Jeep guy 57
Rhinelander, Wi
Verified
Perfect set for my 57 CJ5 power steering
i would buy it again
5.0
4 years ago
willie
tilden ne
Verified
i like the way it make my engine look i have not try to use the braided line yet i need to start my motor
Would Recommend
I would defiantly buy this again.
5.0
5 years ago
Curt
Lakeland, Fl.
Verified
This will look great on my new 1923 deluxe frame from Speedway,
Would Recommend
Exactly what l wanted
5.0
6 years ago
69Elco
Australia
Verified
I had a very tight space between my steering box and my power steering pump. The pre-fitted tight bends on these hoses were the only thing l could find to fit. Speedway motors come to the rescue.
Would Recommend
GREAT PRODUCT, WOULD BUY AGAIN
5.0
7 years ago
WILLIESVICKY
WEBSTER,NY
Verified
I HAD A VERY TIGHT SPACE ON MY '32 FORD & I WAS ABLE TO FIT THESE IN WITH NO PROBLEM...VERY FLEXIBLE!
Would Recommend
Works well
4.0
7 years ago
Jeff
Defuniak springs fl
Verified
Good part
Would Recommend
Highly recommend
5.0
7 years ago
Nasty65
WV
Verified
Not only did this set of lines solve my leak issue they are a huge improvement to the look of the car.
Would Recommend
Big problem
1.0
8 years ago
Franck
France
Verified
Unable to screw when the braided hose inside. And after grinding and checking first raising of pressure and hose is blowing !
Would Not Recommend
Showing 10 of 16 reviews
Questions & Answers
Questions & Answers
2 Questions • 2 Answers
I have an original style GM power steering pump on my 68 Camaro. The pump has a nipple to accept the factory female end from the high pressure line. Will I need to remove that from the pump and use the supplied banjo fitting or can I get my own fitting for the high pressure line to thread onto the nipple on the pump?
by Daniel
• 7 years ago
1 answer
View Answer
I am building a 68 Chevy C10 resto mod with O.E. style gear box this kit has the correct fittings at the box. the problem I need to solve is getting the pressure line into a newer saginaw with 18mm thread size what adapters would be needed to get from the braided line into the 18mm thread size on the back of the newer style saginaw pump?
by Doogie
• 10 years ago
1 answer
View Answer
2 of 2 questions shown