Garage Sale - KRC KIT16390000 Denso Alt Bracket-Idler Tensioner Basic Drive Kit SBC
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
This is garage sale price because it was used as a trade show display and can no longer be sold as new. It may be missing the belt and some hardware. It is being sold as is pictured. Please see photos above.
NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS
KRC's idler tensioner is a neccessity on dirt cars because elt slippage can occur on cars that exceed 7,000 RPM. They are also vital if you use a large or heavy fixed fan blade or a fan blade with a lot of pitch. These can potentially causes overheating faster wear. This occurs on both single drive belt and pulley systems with a power steering pump mounted on the front of the engine.
This happens because the fan belt and pulleys are required to slow the fan. The belt stretches so it slips while braking, inducing heat into the belt. The belt will continue to stretch as the race goes on, causing engine temperature to slowly climb. To properly tension the belt to prevent slippage is with an idler or tensioner pulley mounted on the passenger side of the engine. This helps the engine run cooler and the belt tighter, allowing faster acceleration out of turns & harder braking on corners.
- Designed for GM 602 & 604 Crate Engines
- Works great with mechanical fans
- Assembly contains:
- Idler - Tensioner
- Alternator Bracket
- Hardware and Instructions
More Like This
Billet Alternator Bracket for Big Block Chevy w/Short Water Pump
Mr Gasket 9853 Alternator Spacer, Universal, 4 x 7/16 Inch
Billet Small Block Ford Alternator Bracket
1969-75 Small Block Chevy Long Water Pump Alternator Bracket, Black
1969-1986 Small Block Chevy Long Water Pump Alternator Bracket, Black
Small Block Chevy Outboard Alternator & A/C Bracket Kit
1969-1975 Small Block Chevy Alternator Brace
1965-1968 Small Block Chevy Alternator Brace
1976-1986 Small Block Chevy OEM Alternator Brace
1965-68 Small Block Chevy Alternator Brace
Q & A
In this episode, Project Chevelle takes a big step in its muscle car transformation. It's out with the little old 307 and to the dyno with our new 383 from BluePrint Engines!
Follow along as Product Guru Jeff K. works his magic on a rather depsondent looking Chevy engine, bringing it back to its former glory.
Kevin W. walks through each step of installing a new alternator bracket on a 454 Big Block Chevy.
These are the specifications for the alternator and A/C brackets from Bill's Hot Rod Company available at Speedway Motors.
One wire alternators offer a simplified installation and a clean setup.
Brief review of the different types of Ford alternators and regulators available through Speedway Motors.
A routine weekly maintenance checklist to perform between each race in order to keep a clean and efficient race car at the track.