Electric Fan Sensor, 3/8 NPT
Universal Fit, 2.166" Overall Length, 1.080" Under Head Length, RH Male Thread Type, Brass
Important Messages:
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
Details
Info
This trick electric fan switch is a normally open temperature switch with 3/8" NPT male threads that screws into your intake manifolds water passage. When the coolant reaches 185°-215°, the contacts on the cooling fan switch close, activating a relay which directs current to your electric fan. When the engine cools, the contacts on the fan relay switch open, and the fan stops automatically. This radiator fan switch arrangement is not adjustable, but is more rugged than other temperature fan switch setups.
NOTE: This thermal fan switch must be used with a fan relay. If installed as a gounding fan switch, it will burn out. We suggest using this temperature fan switch with our relay 910-64044. Make sure the fan switch is mounted in the manifold or radiator tank so that the bulb is submerged in the HOT engine coolant.
910-64019 Instructions (PDF)
More Like This
-
Speedway Radiator Cooling Fan Control Module for Electric Gauges$89.99
-
SPAL Cooling Fan Sensors, 3/8 NPT$27.99
-
Electric Fan Sensor, 1/2 NPT$15.99
-
Perma-Cool 18899 Inline 185 Degree Thermoswitch, -6 AN$40.99
-
Perma-Cool 18900 Inline Thermoswitch 3/8 Inch NPT Style$40.99
-
OER 3967939 Heater Fan Switch, 1969 Camaro/1969-79 Nova w/o AC$29.99
-
DeWitts SP195 Spal Temp Switch$29.99
-
Viper Pipes DASH-101RC Fan Switch Panel, Midget Sprint$17.99
-
DeWitts SP185 Spal Temp Switch$29.99
Reviews
Q & A
-
Speedway Motors employee Pat O. is back to talk Ford Automatic OverDrive Kickdown brackets and kits.
-
-
Speedway Motors employee Pat O. talks about the CPP Hydroboost Brake System.
-
Speedway Motors employee Pat O. talks about the King Bee Headlight and a few conduit options available at Speedway Motors.
-
Steering column wiring does not need to terrify as many people as it does. it is actually very simple, all that is needed is time, patience, and tips like you will find if here!
-
Testing a 2 or 3 wire speed sensor sounds difficult, but these videos show that it actually is quite easy!
-
Speedway Motors and Classic Trucks called on Painless Wiring to power their ground up rebuild of a 1952 Chevy truck that was built in celebration of Speedway Motors’ 65th anniversary.