Edge Products 30300 Comp Module, 1998-2000 Dodge Cummins 5.9L 24V
- This item ships directly from the manufacturer. It may take an additional 3 business days for Edge Products to ship this item.
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
The comp is a mild to wild performance upgrade for the driver who wants adjustable power, added towing capacity, improved fuel economy, and extreme power. Product is perfect for customer who already has gauges in their truck and now wants to get better performance.
The Edge Comp module maximizes engine efficiency by monitoring the RPM, timing, turbo boost pressure and fueling parameters of your Cummins engine. The Comp module uses this information to determine and control both fueling and timing enhancements for the Bosch fuel injection pump. Timing and fueling enhancements are controlled via CAN-BUS through the Data Link and by connecting directly into the Bosch fuel injection pump.
The Edge Comp features five power levels with power gains from 40-120 horsepower. Each of the levels has five independent adjustable sub-levels to control low boost fueling, providing a total of 25 levels of adjustability! The responsiveness settings enable you to dial-in the optimum balance between responsiveness and low boost smoke control no matter what additional power modifications have been made to the engine. The Comp module is fully adjustable on-the-fly and mounts inside the cab.
The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge Juice module. Power gains may vary based on vehicle and geographical location.
Level 0: Stock
Level 1: 40 Horsepower - 150 Foot Pounds of Torque
Level 2: 60 Horsepower - 200 Foot Pounds of Torque
Level 3: 80 Horsepower - 250 Foot Pounds of Torque
Level 4: 100 Horsepower - 300 Foot Pounds of Torque
Level 5: 120 Horsepower - 350 Foot Pounds of Torque
Install Instructions (PDF)
Application1998-2000 Dodge Ram 2500 5.9L L6
1998-2000 Dodge Ram 3500 5.9L L6
Q & A
Speedway Motors employee Pat O. talks about the CPP Hydroboost Brake System.
Speedway Motors employee Pat O. is back to talk Ford Automatic OverDrive Kickdown brackets and kits.
Speedway Motors employee Pat O. talks about the King Bee Headlight and a few conduit options available at Speedway Motors.
Steering column wiring does not need to terrify as many people as it does. it is actually very simple, all that is needed is time, patience, and tips like you will find if here!
Testing a 2 or 3 wire speed sensor sounds difficult, but these videos show that it actually is quite easy!
Speedway Motors and Classic Trucks called on Painless Wiring to power their ground up rebuild of a 1952 Chevy truck that was built in celebration of Speedway Motors’ 65th anniversary.
Unbox our most popular wiring harness with Tim.