Product Summary

EFI Fuel System Type, Multi-port Injection Style, EGR

    Key Specs

    MFG. Part #3881

    Need To Know

    This Product Will Ship Free

    Shipping Policies & FAQs

    Quick and Easy Returns

    Return Policy


    These Edelbrock Performer Truck EFI intake manifolds are designed for use with 1988-96 Ford 5.8L engines. They feature the latest airflow technology for maximum torque gains in the mid range as well as a broad power range from idle to 5,500 rpm and a removable plenum cover to access the runners.
    • For Idle to 5500 RPM Street-Driven Performance
    • Produced 34 ft/lbs. More Torque than Stock
    • Removable Plenum Cover for Runner Access
    • Base Manifold is CNC Matched to Upper Manifold
    • 50 State Street Legal for 1988 to 96 5.8L Engines
    • Upper Manifold ; Cover Powder-Coated Titanium Gray
    • Accepts All Stock Hardware
    • Match w/Other Power Packages for More Performance


    CARB Warning

    Follow EPA, CARB, and state regulations for engine changes

    Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine


    MFG. Part #3881
    Fuel System TypeEFI
    Injection StyleMulti-port
    Carburetor Flange Type4-Barrel Square Bore
    RPM RangeIdle-5,500
    Material TypeAluminum
    Intake Section IncludedComplete
    Plenum MaterialAluminum
    Plenum FinishLight Titanium Powdercoated
    Throttle Body IncludedNo
    Injectors IncludedNo
    Aftermarket Fuel Rail RequiredNo
    Fuel Rails IncludedNo
    Gaskets IncludedNo
    Overall Height13.25"
    Bolt Hole Pattern5.160" x 5.625"
    Runners IncludedNo
    Runners RemovableNo
    Supplemental Bosses Cast-InNo
    Supplemental Bosses MachinedNo
    Sold in QuantityKit
    GTIN Code085347038817