Product Summary

EFI Fuel System Type, Multi-port Injection Style, EGR

    Key Specs

    MFG. Part #3841
    Material TypeAluminum

    Need To Know

    This Product Will Ship Free

    Shipping Policies & FAQs

    Quick and Easy Returns

    Return Policy

    Edelbrock 3841 Details

    This intake manifold fits 1987-96 Ford pick-up trucks with a 5.0L EFI V8. The modular design incorporates the latest air flow technology for maximum torque gains in the mid-range where trucks need it most. Stock replacement and 50-state street legal for 1987-96 5.0L engines. This manifold accepts all stock hardware. The upper and plenum cover are powder-coated light titanium gray. The base is satin aluminum and not powder-coated. Use with stock or stock replacement twin throttle body.
    • For Idle to 5500 RPM Street-Driven Performance
    • Removable Plenum Cover for Runner Access
    • Base Manifold is CNC Matched to Upper Manifold
    • 50 State Street Legal for 1987 to 96 5.0L Engine
    • Upper Manifold ; Cover Powder-Coated Titanium Gray
    • Accepts All Stock Hardware
    • Match w/Other Power Packages for More Performance
    • Use With Stock Replacement Twin Throttle Body


    CARB Warning

    Follow EPA, CARB, and state regulations for engine changes

    Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

    Edelbrock 3841 Specifications

    MFG. Part #3841
    Material TypeAluminum
    Fuel System TypeEFI
    Injection StyleMulti-port
    Carburetor Flange Type4-Barrel Square Bore
    RPM RangeIdle-5,500
    Intake Section IncludedComplete
    Plenum MaterialAluminum
    Plenum FinishLight Titanium Powdercoated
    Throttle Body IncludedNo
    Injectors IncludedNo
    Fuel Rails IncludedNo
    Gaskets IncludedNo
    Overall Height13.25"
    Bolt Hole Pattern5.160" x 5.625"
    Runners IncludedNo
    Runners RemovableNo
    Supplemental Bosses Cast-InNo
    Supplemental Bosses MachinedNo
    Sold in QuantityKit
    GTIN Code085347038411