Edelbrock 2886 Victo Intake Manifold, Chrysler B Big Block

Ask a Question

Edelbrock part #2886 Victor 383 intake manifold is available for competition Chrysler B Series Wedge 361-383-400 c.i.d. engines.
The computer-generated runners easily handle the high airflow requirements demanded by large displacement low-deck engines.

$406.95

Factory Shipped

This part will be shipped by the manufacturer. We estimate this item will ship on or before June 20th.

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

361, 383, 400, Carbureted Fuel System Type, Aluminum

Edelbrock part #2886 Victor 383 intake manifold is available for competition Chrysler B Series Wedge 361-383-400 c.i.d. engines.
The computer-generated runners easily handle the high airflow requirements demanded by large displacement low-deck engines.
This extra tall single plane manifold combines a long runner, "line of sight" layout, and extended divider walls to maximize torque, power and fuel distribution throughout the mid and upper rpm range.
We've added extra material to the square bore carburetor pad and included the inside bolt pattern so it can be easily opened up for Thermo-Quad applications.
Match with Edelbrock Performer RPM or Victor aluminum cylinder heads for even higher performance potential.

See more details

Key Specs

MFG. Part #	2886
Brand	Edelbrock
Intake Manifold Type	Single Plane
RPM Range	3,500-7,500
Material Type	Aluminum

See more specs

Need To Know

This Product Will Ship Free

Need help?

Quick and Easy Returns

Edelbrock 2886 Details

Edelbrock Victor 383 Intake Manifold for Chrysler 361-383-400 Big-Block V8

Edelbrock part #2886 Victor 383 intake manifold is available for competition Chrysler B Series Wedge 361-383-400 c.i.d. engines.
The computer-generated runners easily handle the high airflow requirements demanded by large displacement low-deck engines.
This extra tall single plane manifold combines a long runner, "line of sight" layout, and extended divider walls to maximize torque, power and fuel distribution throughout the mid and upper rpm range.
We've added extra material to the square bore carburetor pad and included the inside bolt pattern so it can be easily opened up for Thermo-Quad applications.
Match with Edelbrock Performer RPM or Victor aluminum cylinder heads for even higher performance potential.
Edelbrock part #7799 valley cover is required when used with Edelbrock Victor series cylinder heads.

Guides & Documents

Intake Manifolds Instruction Sheet (3252886)

CARB Warning

For race/ off road use only

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

CA Prop 65

CARB warning

Edelbrock 2886 Specifications

KEY SPECS
MFG. Part #	2886
Brand	Edelbrock
Intake Manifold Type	Single Plane
RPM Range	3,500-7,500
Material Type	Aluminum

GENERAL
Speedway Motors Catalog Part #	325-2886
Fuel System Type	Carbureted
Carburetor Quantity	One
Carburetor Flange Type	4-Barrel Square Bore
Finish	Natural
EGR	No
Intake Section Included	Complete
Gaskets Included	No
Overall Height	6.13"
Bolt Hole Pattern	5.160" x 5.625"
Sold in Quantity	Each
Notes	Also drilled for Thermo-Quad carb, but machining required to adapt. Includes non-machined nitrous bosses.
GTIN Code	085347028863