Earls 750055ERL Vapor Guard EFI 5/16 Inch Hose
Modern fuels are at war with your fuel system. Modern fuels (more than 40 EPA-approved fuel blends in the US alone) include additives that break down traditional rubber hose. This breakdown leads to potentially dangerous leaks & weeping as well as vapors that waste fuel and leave unwanted odors in your shop. Once fuel lines are degraded, hose particles can contaminate and obstruct fuel injectors and carburetor passages. Earl’s Vapor Guard hose and hose ends provide a complete, economical solution that virtually eliminates these fuel permeation issues common with most rubber fuel lines. Vapor Guard’s secret is in its layers. The innermost Primary Barrier Layer offers high resistance to heat and aggressive fuels. The middle Vapor Guard™ Barrier is a Thermoplastic layer that provides superior fuel isolation and virtually eliminates vapors from escaping through the hose. The Exterior Cover Barrier provides extreme tolerance to heat and ozone giving Vapor Guard a three way shield against hose deterioration.
- 225 psi
- 5/16" hose size
- Sold in 3, 6, 10, 15 and 20 foot lengths
Vapor Guard hose must be used with Vapor Guard hose ends and clamps (other hose barb style fittings or hose ends may damage the inner liner on the hose)
*Quantity ordered of bulk hose (one foot) determines quantity. (Example: Quantity 24 = 24 foot of hose)
More Like This
Q & A
Speedway Motors employee Pat O. takes some time to discuss the Fuel Gauge Interface Module that allows you to use any gauge set with almost any fuel level sending unit.
Tim talks about his favorite intake manifold, the Might Edelbrock X1.
Tim talks about the new Edelbrock powder coated cylinder heads and provides a little history on Federal Mogul heads.
Speedway Motors and Classic Trucks built a 1952 Chevy truck in celebration of the 65th anniversary of Speedway Motors. Check out the short video on one of the products used in the build.