Competition Engineering C2730 Adjustable Drag Shock, 60-79 Dodge/Ply.

Competition Engineering’s 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track conditions. Shock valving plays a very important role in the way your car will perform both during initial launch and throughout the quarter mile. The principle behind Competition Engineering's shock absorber design is to allow the front end of the race car to rise rapidly upon initial launch, creating greater weight transfer and better traction to the rear tires. As the car travels down the track, the front end will gradually descend to its ride height without unloading the rear tires which is a major cause of wheel spin. Our rear shocks work in conjunction with our front shocks making the transition from initial launch to top end charge as smooth as possible.

Competition Engineering’s Front Drag Shocks are adjustable in three ratios: 90/10, 80/20 and 60/40. These ratios reflect the percentage of force required to extend and compress the shock absorber. You can quickly change the valve setting by simply compressing the shock fully and rotating the shaft until the indexing notch mates with the desired setting on the body. It’s as simple as twist and click. The Rear Drag Shocks are also adjustable in three ratios: 70/30, 60/40 and 50/50. These ratios also represent the percentage of force required to compress and extend the shock unit. Only this time, the first number is compression and the second extension. These shocks also adjust by compressing them fully and rotating to the desired setting on the body.

• Monotube design
• Adjustable
• Fits 1960-79 Dodge/Plymouth
• Sold each

Fits; Dodge Challenger 1970-’74, Dodge Charger/Coronet 1965-’72, Dodge Lancer 1961-’78, Dodge Magnum XE 1977-’79, Dodge Monaco 1962-’78, Chrysler Cordoba 1975-’76, Plymouth Barracuda 1970-’74, Plymouth Belvedere/Fury/Savoy 1962-‘70, Plymouth Satellite 1965-’74, Plymouth GTX 1967-’70, Plymouth Road Runner 1968-‘75