|
#91030901
$711.99
/kit
In Stock
$721.98
Save $9.99
Order soon, only 1 left in stock!
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Front Position, 11.75 Inch Rotor Diameter, Natural
Comes as a Kit
View Kit Components
| MFG. Part # | 4953WBK-S |
| Position | Front |
| Wheel Bolt Pattern (in.) | 5x4.5 in. |
| Wheel Bolt Pattern (mm) | 5x114.3 mm |
| Rotor Diameter | 11.75 Inch |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThis wheel kit is designed to bolt on to factory spindles on your Ford Shoebox. A forged aluminum hub helps to make the kit strong and lightweight. Kit inlcudes aluminum hubs with races, wheel studs, bearings, seals, plain rotors, loaded calipers, mounting plates and brackets, brake houses, banjo bolts, spindle nut kits and mounting hardware.
Notes
This kit keeps the factory 5x4.5 lug pattern. Will not work for Mercury.
Charts
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 4953WBK-S |
| Brand | CPP |
| Position | Front |
| Wheel Bolt Pattern (in.) | 5x4.5 in. |
| Wheel Bolt Pattern (mm) | 5x114.3 mm |
| Rotor Diameter | 11.75 Inch |
| Rotor Type | Vented |
| Caliper Pistons | Two |
| Caliper Finish | Natural |
| Parking Brake Provision | No |
| Minimum Recommended Wheel Diameter | 15 Inch |
| Rotor Shape | Round |
| Hardware Included | Yes |
| Rotor Style | Plain Face |
| Spindle Type | Stock Height |
| Front Rotor Included | Yes |
| Front Rotor Diameter | 11.75 Inch |
| Front Caliper Included | Yes |
| Rear Caliper Included | No |
| Front Spindles Included | No |
| Master Cylinder Included | No |
| Brake Booster Included | No |
| Brake Hoses Included | Yes |
| Rear Rotor Included | No |
| Bolt Pattern | 5 on 4.5" |
| Color | Natural |
| Front Caliper Finish | Natural |
| Front Caliper Piston Quantity | Two |
| GENERAL | |
| Sold in Quantity | Kit |
| Front Rotor Thickness | 1.00" |
| Front Caliper Material | Cast Iron |
| Brake Lines Included | Yes |
5 Questions • 5 Answers
What replacement brake pads are recommended for this kit?
by flyingv50
• 7 years ago
1 answer
View Answer
On a stock 51 ford custom. I need the ft disc brake conversion, a brake booster and master cylinder right? ANYTHING else? Should i also do the rear brakes to disc or simply redo the stock brakes? Had a 239 v flathead. Suggestions?
by Lightning
• 8 years ago
1 answer
View Answer
Will this kit require a power brake booster?
by Max
• 8 years ago
1 answer
View Answer
Will this Disc Brake kit work with Fat Man 1953 Ford Dropped Spindles?
by David
• 8 years ago
1 answer
View Answer
Can this disc brake setup be used with the stock brake master cylinder? Or is a master cylinder upgrade required, and if so what do you recommend?
by Not sure
• 10 years ago
1 answer
View Answer
5 of 5 questions shown
1953 Ford Club
1950-1953 Ford Country Sedan
1950-1953 Ford Country Squire
1950-1953 Ford Crestline
1949-1952 Ford Custom
1952-1953 Ford Customline
1949-1951 Ford Deluxe
1952-1953 Ford Mainline
1950-1953 Ford Ranch Wagon
1952-1953 Ford Sunliner
1951-1953 Ford Victoria
