The HDS-40 four-post lift is the safest, beefiest, biggest, baddest, meanest and every other “-est” word for a truck lift we can use to mean, “It doesn’t get better than this.” This extreme heavy-duty four-post lift can support the weight of a Greyhound™ bus, as well as a mobile home or RV.

40,000-lb. lifting capacity
Supersized 12" diameter cable sheaves
Galvanized lifting cables
Grease nipples
Single hydraulic under-runway cylinder
Integrated flow restrictor
Durable powder coat
Spring-loaded safety locks
Second lock system on constant guard
Fully enclosed lifting cables
Multiple adjustable height locking positions
Maintenance-free electric hydraulic power system
Conveniently positioned operator controls
12" x 12" base plates
Non-skid runways

Due to the shipping weight and dimensions of this item, it is required that it be shipped to a business address that will have either a receiving dock or fork lift at the delivery destination to allow for the item to be unloaded from the truck/trailer at the time of delivery.

Charts

BendPak Four-Post Vehicle Lift Installation and Operation Manual (PDF)

BendPak Delivery Requirements (PDF)

BendPak Delivery Information (PDF)

Specs

Capacity

Lifting Capacity* - 40,000 lbs.

*Max Capacity / Front Axle - 20,000 lbs.

*Max Capacity / Rear Axle - 20,000 lbs.

Rise

A - Min. Runway Height: - 8.5"

B - Max. Rise: - 60"

C - Max. Lifting Height: - 68.5"

Time to Full Rise: - 75 seconds

Outside Dimensions

D - Overall Width: - 154"

E - Outside Length: - 257"

F - Overall Length: - 297"

G - Height of Columns: - 93"

Inside Dimensions

H - Width Between Columns: - 134"

I - Drive-Thru Clearance: - 109"

Runways

J - Runway Width: - 28"

K - Length of Runways: - 263"

L - Width Between Runways: - 36" or 47"

M - Runway Centerline: - 64" or 75"

N - Outside Edge of Runways: - 92" or 103"

Minimum Wheelbase

Rated Capacity: - 185"

75% Capacity: - 160"

50% Capacity: - 135"

25% Capacity: - 110"

Locking

Locking Positions: - 9

Lock Spacing: - Every 6"

Power Unit

Motor: - 220 VAC / 60 Hz. 1Ph.

Noise: - 45 dB

Guides & Documents

Automotive Lifts Installation Instructions (9105175176)

Technical Information (BendPak)

Warranty Information

BendPak Limited Warranty (PDF)

WARNING:

Cancer and Reproductive Harm – www.P65Warnings.ca.gov

BendPak 5175176 Specifications

KEY SPECS
MFG. Part #	5175176
Brand	BendPak
Lifting Capacity	40,000 lbs.
Overall Height	93.00"

GENERAL
GTIN Code	00849672001942
Sold in Quantity	Each
Motor	220 VAC / 60 Hz / 1 Ph
Time to Full Raise	75.00 seconds
Overall Width	154.00"
Overall Length	297.00"
Outside Length	257.00"
Height of Columns	93.00"
Length of Runways	263.00"
Runway Min Height	8.50"
Runway Width	28.00"
Width Between Runways	36.00"
Max Lifting Height	68.5"
Width Between Posts	134.00"
Min. Wheelbase (25% Capacity)	110.00"
Min. Wheelbase (50% Capacity)	135.00"
Min. Wheelbase (75% Capacity)	160.00"
Min. Wheelbase (Rated Capacity)	185.00"
Locking Positions	9
Lock Spacing	6.00"

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.