AEM 30-5130 Analog Style Wideband UEGO Gauge
Universal Fit, Electrical Sending Unit, Sending Unit Included, Orange, Wideband AFR Gauge Type
AEM’s Analog-Style Wideband UEGO AFR Gauge is a wideband UEGO air/fuel ratio controller (AFR) and gauge in one. It unites accuracy, speed, and control with an easy to read, digital LED display and sweeping LED “needle” that changes colors as AFR changes from rich to lean.
Our analog-style gauge-type controller features 320 degrees of resolution for detecting even a tenth of a point change in AFR and has a high-speed electric stepper motor for lightning-fast needle movement. The Analog Wideband gauge also features seven (7) user-selectable backlighting colors that allow you to match it to most factory gauge clusters. As with all of our Wideband Systems, they are fast and accurate.
WHAT IS A WIDEBAND UEGO AIR/FUEL CONTROLLER?
AEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced “You-Way-Go”) Controllers are powerful, cost-effective tuning tools that allow users to accurately monitor the Air/Fuel Ratio (AFR) of their engine.
WHY USE A WIDEBAND AIR/FUEL CONTROLLER?
Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air/fuel controllers that can help ensure your vehicle is optimally tuned.
WHAT IS FREE-AIR CALIBRATION?
Some of our competitors require that you frequently perform a free-air calibration procedure to calibrate their O2 sensors. This process involves removing the sensor from the bung while still connected to the controller device, then waving the sensor in the air so it can read atmospheric O2 levels. We use Bosch 4.2LSU sensors in our wideband controllers. Our sensors are individually laboratory-calibrated by Bosch and never require free-air calibration!
CAN I CHANGE THE AEM UEGO SENSOR’S CONNECTOR?
No. There is a laser-etched, calibrated resistor in the sensor’s connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor’s output.
Our highly popular Analog-Style Wideband O2 air/fuel ratio UEGO gauge features a high-speed electric stepper motor for lightning-fast needle movement and a full 320 degrees of viewing resolution to detect even a .5 degree of change in AFR. Seven backlit colors allow you to match the lighting to most factory gauge clusters. A 52mm (2-1/16") gauge housing ensures that it will fit in most gauge pods and can be remotely mounted virtually anywhere. All AEM gauges feature a 0-5v analog output for use with data loggers and almost any engine management system.
The Analog-Style Wideband O2 air/fuel ratio UEGO gauge is a must if you want to maximize your engine's power and safety. When tuning an engine, accurate air/fuel ratio data is critical because running with too rich of an AFR can cause a loss of power, and running a lean AFR can result in serious engine damage. AEM's Analog-Style Wideband AFR UEGO gauge can quickly alert you to even a .1 change in air/fuel ratio and provide enough time to shut down an engine before damage occurs.
The Bosch UEGO sensor gives the controller its speed and accuracy. It is laboratory calibrated at the factory and NEVER requires free-air calibration when used with AEM wideband air/fuel controllers.
- Interchangeable black and white faceplates included for customizing gauge appearance (digital gauges only)
- Bosch 4.2 LSU wideband sensor and weld-in bung included
- No free air sensor calibration required - ever
- Interchangeable black and silver bezels included
- Interchangeable black and white faceplates included
- User-definable backlighting (Analog Only) to match most factory gauge clusters
- 52mm (2-1/16”) gauge housing
AFR VALUE RANGE BY FUEL TYPES:
- Gauge Display(PN: 30-5130)/0-5V Output Gasoline values from 8.5 to 18:1 AFR
- Gauge Display(PN: 30-5143)/0-5V Output E85 values from 5.7 to 11.9:1 AFR
- 0-5V Output Ethanol values from 5.2 to 11:1 AFR
- 0-5V Output Methanol values from 3.7 to 7.8: AFR
- 0-5V Output Lambda values from 0.58 to 1.22
- This item ships directly from the manufacturer. It may take an additional 2 business days for AEM Electronics to ship this item.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
More Like This
AEM 30-5143 Analog Style E85 Wideband UEGO Gauge
AEM 30-4110 Digital Wideband UEGO Gauge with Bosch LSU 4.9 sensor
AEM 30-4900 Wideband Failsafe Gauge
AEM 30-0300 X-Series Wideband UEGO AFR Sensor Controller Gauge
AEM 30-0334 X-Series Wideband UEGO AFR Sensor Controller Gauge
AEM 30-4110NS Digital Wideband UEGO Gauge, no sensor
AEM 30-4911 Wideband Failsafe Gauge
AEM 30-4910 Wideband Failsafe Gauge
AutoMeter 6175 Cobalt Digital Narrowband Air/Fuel Ratio Gauge
Edelbrock 6593 Performer Series Air/Fuel Ratio Gauge, Electrical
Q & A
Speedway Motors product expert Pat shows off some of our CNC billet aluminum pieces available for your late 60's Chevy or Ford truck.
Speedway Motors employee Pat joins us once again. This time Pat is talking to the Model A and Model T owners, specifically in regards to Moto-Meters and accessories.
Learn how to replace a fuel sending unit. Our fuel gauge sending unit guide and installation video covers all you need to match your fuel sender and gauge.
Darrian demonstrates how to program our Omega Kustom Quad Gauges. Check it out!
Pat talks about our GPS module that generates a speed signal to your electronic speedometer.
Darrian explains how to program the Omega Kustom 3-N-1 Gauge in the third and final video of the series.
Check out the second video on how to program Omega Kustom Gauges!