AEM 30-2130-7 100 PSIa or 7 Bar Stainless Sensor Kit
Universal Fit, 7 bar MAP Sensor Range
Absolute (PSIa) Pressure Sensors
AEM offers high quality stainless steel PSIa sensors in 15 (1BAR), 30 (2BAR), 50 (3.5BAR), 75 (5BAR) and 100 (7BAR). PSIa is referenced to absolute zero. Absolute zero is the pressure measurement when all the pressure exerted by the atmosphere has been removed. The most common use for absolute pressure sensors is reading manifold pressure. PSIa sensors are required if you wish to measure vacuum. A PSIa sensor will read about 14.7 PSI when the sensing element is exposed to atmospheric pressure at sea level however they can be recalibrated to read zero at atmospheric and a negative number at values less than atmospheric pressure.
Which Pressure Sensor is right for you?
There are many different tools that can be used for measurement, but the degree of accuracy is dependent upon the tool. For example, a ruler can measure distance with a good degree of accuracy, but for more precise measurement, a caliper should be used. The difference between a brass pressure sensor and a stainless steel pressure sensor is similar if we think about it in these terms:
Brass Pressure Sensor = Ruler
- Use a Brass Pressure Sensor where you need a good reference to what pressure is being seen.
- Example: Brass Pressure Sensor used for a Boost Gauge – Reference/Information for knowing manifold pressure, not for ECU calibration.
Stainless Pressure Sensor = Caliper
- Use a SS Pressure Sensor where you need exact details of the pressure.
- Example: MAP Sensor information for the ECU – Calibration/crucial information for the ECU.
- Stainless-steel sensors accurate to within 1% of full scale (pressure sensors)
- High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area)
- Connector and pins included
- 100 PSIa or 7 Bar Stainless Sensor Kit
- Stainless Steel Sensor Body
- 1/8" NPT Male Thread
- 100 PSIa or 7 Bar Stainless Sensor
- 1/8" NPT to -4 Adapter
- 1/8" NPT to 3/16" Barb Adapter
- This item ships directly from the manufacturer. It may take an additional 2 business days for AEM Electronics to ship this item.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
More Like This
AEM 30-2130-50 50 PSIa or 3.5 Bar Stainless Sensor Kit
AEM 30-2130-30 30 PSIa or 2 Bar Stainless Sensor Kit
AEM 30-2130-75 75 PSIa or 5 Bar Stainless Sensor Kit
AEM 30-2131-50 50 PSIa or 3.5 Bar Brass Sensor Kit
AEM 30-2131-30 30 PSIa or 2 Bar Brass Sensor Kit
AEM 30-2130-15 15 PSIa or 1 Bar Stainless Sensor Kit
AEM 30-2131-75 75 PSIa or 5 Bar Brass Sensor Kit
FAST 307007 1 Bar MAP Sensor, Each
FAST 307008 2 Bar MAP Sensor, Each
FAST 307029 1 Bar MAP Sensor, LS1 Style, GM 16212460
Q & A
Pat talks about one of our cold air intake kits from AIRAID.
Tim talks about Edmunds air cleaners and the history of Edmunds.
Tim shows off the two Cadillac style air cleaners we have to offer.
In this episode, Project Chevelle takes a big step in its muscle car transformation. It's out with the little old 307 and to the dyno with our new 383 from BluePrint Engines!
Check out episode 9 of our 410 Sprint Car Build series! Today, the guys are having some fun with the fuel system.
Do you have carbs sitting on the shelf waiting to be put on? Heath talks about the preparation and parts needed to install a set of Super 9-7 Carbs on his 1949 Flathead 8BA V8 Model A.
A routine weekly maintenance checklist to perform between each race in order to keep a clean and efficient race car at the track.