1964-66 Ford Mustang Drilled/Slotted Front Disc Brake w/Spindles

Brake Kit

Tired of the weak braking power on your Mustang's drum brakes? So are we. That's why we have introduced the easy to bolt on disc brake kit that will have your Pony stopping on a dime! OEM style 4 piston calipers are sure to do the trick. Kit comes complete with everything you need to swap out your front brakes. Will not retain original bolt pattern when used with the 6-Cylinder Drum Brake Spindles Converts all others to a 5 LUG. If the brake kit isn't enough we have added power brakes with the slim line 7' single power brake booster and "Teardrop" casting number correct master cylinder! Get stopping power and retain that OEM look under the hood with this easy to install brake kit for your Mustang.

1964.5-1966 Ford Mustang Power Disc Brake Conversion Kit

Easy to install disc brake conversion kit uses the original drum spindle.

Minimum Rim size is 14x7" Front with a 5x4.5" bolt pattern.

Kit includes:

• 4 piston Front caliper
• Pads pre-loaded
• Drilled and Slotted Rotors Front
• Rubber brake hoses 
• Bearings, seals, dust caps & hardware
• Caliper brackets Front
• Dust shields 
• Ford Mustang Style Booster Conversion Kit
• 7" Single Ford Bolt Pattern Brake Booster Powder Coated Black
• Square single bail master cylinder w/ Casting numbers & "Teardrop"
• O.E.M. Embossed lid available!
• Disc/Drum proportioning valve kit w/ Bottom mount bracket & lines

Spindles

These spindles were obsoleted long ago by Ford and have become increasingly expensive and extremely difficult to find and now Scott Drake has the answer. Our Engineering team started with a set of used, but excellent condition, Ford originals, to create 3D scans which were then used for CAD modeling and then double checked against original Ford blueprints. No corners were cut on this critical component - they were constructed from FORGED ASTM 5140 grade steel, then we applied a protective, black e-coating and then all mounting surfaces were precision machined. We took special care to ensure bearing tolerances were identical to Ford's. For an extra measure of safety and durability, the entire spindle is heat treated and the bearing surface is treated with additional induction hardening. All Drake spindles are 100% Magnetic Particle Tested as well. These spindles also fit a wide variety 1960s Ford and Mercury cars.

• Works with 1964-1969 V8 drum brake spindles.
• Also fits 1967-1969 6-Cylinder Drum Brake spindles but converts the vehicle to 5 lug.
• Will not retain the original bolt pattern if used with 6-cylinder drum brake spindle.

Will Also Fit:

• 63-69 Falcon
• 64-69 Fairlane, Ranchero, Comet, Cyclone
• 67-69 Cougar
• 68-69 Torino, Montego

Installation Instructions (PDF)