1947-53 EFI Ready Aluminum Fuel Tank
47-54 Chevy Truck, 1954 Chevy 1500, 47-52 Chevy Fleetline Truck, 47-48 Chevy Fleetmaster Truck
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
This 17 gallon aluminum fuel tank is designed to be mounted under your 1947-53 Chevy pick-up box. The 1-1/2" filler neck will require a remote filler neck or fuel filler door in the box floor. They DO NOT accept the original truck fuel sending unit, but do accept the common sending unit provided with aftermarket gauge sets. Therefore consideration is needed when choosing the fuel gauge configuration when purchasing. Tank is designed to use submersible fuel pump module 911-40233.
- 17 gallon capacity
- Hardware included
- Aluminum construction
- Baffled in the middle of the tank
- Natural finish
- Sold each
Measures 38" x 12" x 8-1/2". The actual tank is 38" wide, the mounting tabs are 3" on each side of the tank. The total width of this tank is 44" with the mounting tabs.
Mounting brackets are 4" down from top and 4-1/2" up from bottom of tank and are 10" wide.
Outside bracket to outside bracket is 44"
Fill spout is 1-1/2" tall x 1-1/2" OD.
More Like This
1947-53 Chevy Pickup Under Box Aluminum Fuel Tank
Spun Aluminum Fuel Tank, 9-1/2 Gallon, 10 x 28-1/2 Inch
Spun Aluminum Fuel Tank, 7 Gallon, 8 x 33 Inch
Spun Aluminum Fuel Tank, 5 Gallon, 8 x 24 Inch
Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Centered Outlet
Speedway Universal Fabricated Aluminum Fuel Tank, 16 Gallon
Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Offset Outlet
Speedway 7 Gallon Spun Aluminum Fuel Tank
Speedway 5 Gallon Spun Aluminum Fuel Tank
Speedway Aluminum Tank, 4 Gallon, 8 x 20-1/2 Inch
Q & A
Speedway Motors employee Pat O. is back with Dave's 1951 Chevy Truck project to talk about the 1947-1954 Chevy Truck EFI Fuel tank available from Speedway Motors.
Pat talks about our Tanks Inc. EFI fuel tanks.
Speedway Motors and Classic Trucks built a 1952 Chevy truck in celebration of the 65th anniversary of Speedway Motors. Check out the short video on one of the products used in the build.
Speedway Motors employee Pat O. is back to talk about a cool little nostalgic piece now available at Speedway Motors, our Fiberglass Tunnel Ram Shark Scoop.
Speedway Motors employee Pat O. takes some time to discuss the Fuel Gauge Interface Module that allows you to use any gauge set with almost any fuel level sending unit.