Speedway Chrome 1937-48 Ford Drop Steering Arms, 3-3/4 Drop
Universal Fit, 3.75" Drop, 3.375" Center to Center, Steel, 7 degree Degree of Taper
- These drop steering arms feature a 3-3/4" drop to clear most radius rods and wishbones on spring-over front axles
- The arms are available in either plain, chrome, or stainless steel to match the finish on the rest of your front end kit
- These arms attach to all 1937-48 Ford spindles allowing you to use common spindles and components
- They accept 11/16" Ford 7 degree tapered tie rod ends, or can also be drilled out to 5/8" for use with heim joint spherical rod ends
- Both the top and bottom of the arm is tapered to allow attachment of the tie rod ends on either side for adequate clearance
These forged steel steering arms will attach to all 1937-48 Ford spindles but their greater drop, 3-3/4" from spindle mount holes means they work best on 1935-48 Ford cars (with spring-over front axle). Clears most radius rods and wishbones. These steering arms accept 11/16" Ford 7 degree "tapered" tie rod ends (both the top and bottom are tapered to allow tie rods to mount above or below arm as needed). You can drill-through with a 5/8" bit to use spherical rod ends.
Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.
Steering Arm Ends Guide (GIF)
Cross Steering Guide (GIF)
- For use with spring-over front axles ONLY. Should NOT be used with spring-behind front axle assembly. Flat plate arms are required when using a spring-behind front axle.
- Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.
- 3-3/4" drop (measured from center of threaded spindle mount holes to the bottom face of the arm, as positioned in the photo)
- 3-3/8" eye-to-eye centers on mount bolt holes
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
More Like This
Ford Upper Steering Arm, Chrome, 7-3/4 Inch, 5/8 Hole
Ford Dog Leg Upper Steering Arm, Chrome, Tapered
Ford Dog Leg Upper Steering Arm, Chrome, 5/8 Hole
Ford Flat Tie Rod Steering Arms, Chrome
1937-48 Ford Steering Arms, 1-3/4 Inch Drop
Chevy Flat Plate Steering Arms, Chrome
Ford Upper Steering Arm, Chrome, 6-1/4 Inch, Tapered
Ford Upper Steering Arm, Chrome, 6-1/4 Inch, 5/8 Hole
Chevy Flat Upper Steering Arm, Chrome
Chevy Flat Tie Rod Steering Arms, Chrome
Q & A
Today on our 410 sprint car, the guys are assembling the front axle. The process can be a bit messy, but the finished product is so worth it!
Learn how to install a front axle in your 410 sprint car as the guys on our build team keep progress moving. You won't want to miss this!
Today we are installing original style pump, pulleys, brackets, and hoses! Watch as Joe and Zach improve the ratio and make driving the Chevelle easier.
Dive into some of the history and unique differences between Ford and Chevy spindles for a solid front axles and what will perform best on your hot rod.
How to install an electronic power steering unit in a micro sprint and the benefits of using power steering. This article includes which parts to use to complete your power steering installation.
Learn how to adjust toe in and ensure your'e driving straight. Adjusting toe on a car might seem like a tricky procedure, but our toe adjustment guide can help.
If you are confused as to how that new steering wheel you want is going to attach to your project's steering column then this buyer's guide should be your first visit before adding that new wheel to your shopping list.