Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Wilwood 140-2118-B Rear Brake Kit - New Big Bearing Ford, 2.5 Offset

SAME DAY SHIPPING! Order within the next 10 hours 31 minutes and receive same day shipping

Specs
Material Type:
Aluminum
Sold in Quantity:
Kit
Bolt Pattern:
Multi: 5 on 5"/4.75"/4.50"
Hardware Included:
Yes
Rotor Diameter:
12.19
Caliper Pistons:
Four
MFG. Part #:
140-2118-B
Rotor Thickness:
.81
Minimum Recommended Wheel Diameter:
15 Inch
Caliper Finish:
Anodized
Parking Brake Provision:
No
Rotor Construction:
Vented
Garage Sale:
No
Rotor Location:
Rear
Rotor Shape:
Round
Drilled:
No
Slotted:
No
Notes
Includes rotors, rotor hats, caliper brackets, calipers, pads, and hardware.
Wilwood 140-2118-B Rear Brake Kit - New Big Bearing Ford, 2.5 Offset
Wilwood 140-2118-B Rear Brake Kit - New Big Bearing Ford, 2.5 Offset

Click image to enlarge

Speeday Motors Logo
X
Wilwood 140-2118-B Rear Brake Kit - New Big Bearing Ford, 2.5 Offset

Details

Reviews

Q & A

What's in the Box

Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the popular Ford big bearing rear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.

These kits do not have emergency brake provisions.

835-1402118 Instructions (PDF)

Axle Flange Identification Chart

Notes

The brake hat used in this kit works with 5 x 4-1/2”, 5 x 4-3/4”, and 5 x 5” bolt circle patterns.

Specs

  • Ultralite HP 32 Curved Vane Vented Rotor - 12.19" x .810"
  • Aluminum hat
  • Forged billet Dynalite four-piston calipers
    • Piston Area (in²): 3
    • 1/8" NPT inlet
  • Minimum Wheel Diameter (in): 15
  • BP-10 Smart pads
  • Aluminum mounting brackets and hardware

Item Details

Big Ford, new style, 2-1/2" offset

You may also be interested in:

Wilwood 260-8419 Knob Style Proportioning Valve
                        

This device lets you adjust the front-to-rear braking balance by proportionally decreasing the rear (or in some cases the front) brake line pressure. Can also be used to adjust individual front wheel braking in dirt track applications. Valve weighs only 5.2 ounces and has two .25" side mounting holes spaced 1.00" apart.

  • Allows easy adjustment of front to rear brake bias
  • Universal design works on all race cars
  • 100 to 1500 psi range, up to 57% pressure reduction
  • Accepts 1/8"-27 NPT fittings

Compensates for weight transfer to the front wheels during braking. All factory brake systems allow for this in some fashion. An APV allows you to "fine tune" a street or race brake system and thus prevents severe rear brake lockup under moderate-to-heavy braking.

835-2608419 Instructions (PDF)

Braided Stainless AN 12 Inch Brake Line
                        

Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each.

AN 3 O.D. is .265 and AN 4 O.D. is .305

Select applicable length. AN size is the "-#" at the end of each part number.

Straight 3/8 Inch-24 IFF to AN 4 Male Adapters
                        AN male all Steel adapters sold in pairs.
                    
9 Inch Ford T-Bolt Kit w/ Nuts
                        

Everything you need to mount brake backing plates to your new 9" Ford housing. 

Includes:

  • (8) T-bolts and matching lock nuts
  • 3/8" fine thread
Wilwood 120-6806 Forged Dynalite Caliper, 1.38 Piston / .81 Inch Disc
                        

The Forged Billet Dynalite has wide spread application over many forms over motorsports. It serves as the base model in the majority of Wilwood's Bolt-On Disc Brake Kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

Get a guaranteed taller pedal and better stopping power with these calipers! New forged design for rotors measuring 10" - 13.06" diameter. Includes 4 stainless steel pistons and a 1/8" NPT inlet. Mounting centers are 5-1/4" apart.

Pads not included.

Catalog Correction:  These calipers will work with 10" - 13.06" O.D. rotors.

 

Speedway 338 Medium Double Quick Change Brake Pad
                        

Double Quick-Change pads are compatible with our Wilwood Forged Dynalite and Billet Dynalite calipers.

Pads are sold each. (Will need 2 per caliper.)

Tech Tip:  Only use full metallic pads on coated rotors.

Brake Pad Brand Guide (Link)

Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.