No items in Shopping Cart
Our lightweight T-bucket disc brake kit for wire wheels includes 360 degree caliper brackets, steel rotors, Wilwood aluminum single piston, floating calipers and hardware. Works with '37-'48 style Ford passenger car spindles.
Wilwood Dynaliterear brake kitscombine high performance braking, high-tech style, and functional simplicity for rear axle disc brake conversions that require a parking brake. Whether it's a simple conversion from drum brakes, or an upgrade to compliment wheels, tires or suspension equipment, these kits have it all.
Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the popularFordsmall bearingrear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.
Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for the popularFord big bearingrear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.
New hard to find Wilwood brakes for you classic Total Performance spindle. FeaturesDynaPro 2-piston billet aluminum calipers and 10.75" x .35" solid steel rotors. Aluminum hubs are drilled to accept both Ford 5-on-4-1/2" and GM 5-on-4-3/4" bolt patterns.
Cables are designed for use with Lokar Floor Mount Emergency Hand Brake (at right). Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless inner cable resists moisture.
Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuimWilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master ...
This kit works well with bolt-on steering arms. The 11" rotor brake kits are great for Street Rods based on 1932-48 Fords. However, for or a T bucket or early roadster, you might consider the Wilwood kits shown below.
Speedway now offers the stand alone emergency brake system you asked for. Kit includes a 3/16" steel rotor, special pinion adapter, aluminum U-Joint girdle, Wilwood mechanical spot caliper, and all hardware.
Give your T roadster the ultimate stopping power with Wilwood disc brakes. These kits feature aluminum hubs with both 5-on-4.5" and 5-on-4.75" bolt patterns, rotors, four-piston calipers with pads, plus all of the bearings, seals, brackets and hardwear you need for installation on our Ford or Chevy style spindles. Rear kit bolts on new-style Big Ford Ends.
If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GM metric style calipers, brake pads and hardware.
Replace those outdated and inadequate drum brakes on your vintage Ford Mustangwith thiscomplete, easy-to-install disc brake conversion kit. This manual, non-power disc brake kitfor 1964-1966Mustang usesa 5 on 4-1/2" bolt pattern and will fit inside 14" x 7" or larger wheels.
This completedisc brake kit easily installs big 11-3/4" rotors on your 1937-1948 Ford car or 1937-1947 Ford 1/2 ton pickup spindleswhile retaining the original 5 on 5-1/2" bolt circle.
This is a non-emergency brake rear disc brake conversion. Replace those old drum brakes with modern rear disc brakes. Features lightweight, black anodized aluminum 4 piston calipers, black steel 11-1/2" diameter 0.350" thick rotors, anodized aluminum hats and caliper mounting brackets, brake pads, hardware and complete instructions.Big Ford.
Just what's needed to update your classic Tri-Five Chevy! Eliminate those archaic ball bearings and gain first class stopping power all at once. This kit will increase the total track width by 1-3/4". Calipers mount to the front of the spindle.
Steel rotor hat fits5on 4-1/2", 5on 4-3/4", and 5 on 5" bolt patternsand hasa 3" backspace.
Kit Includes:
This kit will work with spindles having either original steering arms or with flat steel steering arms. It will not work with forged aftermarket steering arms. Wheels must have 3-7/16" center hole and have been designed for disc brake applications.
This kit will fit Mopar 8 3/4" and Dana 60 rear axlesequipped with green non-adjustable bearings (Mopar P/N RP400). These kits do not have emergency brake provisions.
Wilwood'sFDL Pro-Series rear disc kits provide a complete solution for popular GM 12-boltrear axles that require a parking brake. Forged billet Dynalite four piston calipers, 12.19" one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking.
Wilwood FDL Pro-Series rear disc brake kits provide a complete solution for theuncommon Olds/Pontiacrear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.
Wilwood aluminumrotor hat fits5on 4-1/2", 5on 4-3/4", and 5 on 5" bolt patternsand has a1.94" backspace.
If you don't want to spend an arm and a leg on a rear disc brake kit and still have to weld the bracket on, we've got you covered. This kit includes bolt-on caliper brackets, 11-1/4" vented rotors, '78-'88 GMemergency brakecalipers, brake pads and hardware.
Complete the front and rear suspension assembly on your T roadster chassis with a bolt-on brake kit specifically designed for our '37-'41 Ford style spindles and 9" Ford rear end. Each kit includes all necessary components: new rotors (available with 5-on-4.5" or 5-on-4.75" bolt pattern), remanufactured GM Metric calipers, caliper brackets, brake pads, bearings, seals and hardware. Rear kit bots on new-style Big Ford ends.
Looking for a low cost way to add rear disc brakes to your Ford 8.8" or 9" equipped hot rod, without searching the junk yards? Look no further. This Ford Racing rear disc brake kit includes OE quality single-piston calipers, 11.8" vented rotors, E-coated caliper mounting bracket, and all mounting components. Plus, the E-coated backing plate features an integral parking brake for a convenient install.
Complete the front and rear suspension assembly on your T roadster chassis with a bolt-on brake kit specifically designed for our '49-'54 Chevy style spindles and 9" Ford rear end. Each kit includes all necessary components: new rotors (available with 5-on-4.5" or 5-on-4.75" bolt pattern), remanufactured GM Metric calipers, caliper brackets, brake pads, bearings, seals and hardware. Rear kit bots on new-style Big Ford ends.