This upper control arm for 1970-1981 Camaro is designed to be used with stock mount. Available in 8", 8-1/4", 8-1/2", 8-3/4", 9", 9-1/4", 9-1/2". Cross shaft mount bolts center on center. Measures 7-3/4". The arms are symmetrical. NOTE -This control arm does not use a stock camaro ball joint, (all) of the ball joints that we offer require reaming stock spindle.
These 4130 chromoly metric upper control arms are 40% stronger than standard control arms. They bolt to a stock mount and use the bolt-in style ball joints. Aluminum cross shaft. This control arm is going to have a 1/4" thick plate where the ball joint bolts in. Right arm is 8" long. Left arm is 8.5" long.
These reclaimed 1978-1987 GM midsize metric upper control arms have been cleaned up and painted flat black. Ball joints and bushings will need to be replaced. Specify left or right. Stock Metric Upper control arm is 8" from center of Ball Joint to center of Cross Shaft.
IMCA's 2004 rules now allow the stock car class to use spec tubular upper control arms. The stock arms are getting hard to find and don't have the strength of the tubular design. Bolts to your stock mount and accepts stock ball joints. This control arm is going to have a 1/4" thick plate where the ball joint bolts in. Mid-size GM metric only . Aluminum cross shaft. Available for right (passenger side) or left (drivers side). Right arm length is 8". Left arm length is 8.5".
This upper control arm is garage sale priced because it has been discontinued. NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS
These premium replacement ball joints fit a variety of Ford chassis.Ranchero '63-'66Ranchero '67-'69Ranchero '70-'71Falcon '63-'69Fairlane Torino '62-'69Mustang '64-'69Maverick '70 (to 7-14-69)Comet '63-'69Meteor '62-'63Cougar '67-'69Montego '68-'69
These premium replacement ball joints fit a variety of Ford chassis.Ranchero '63-'66 Ranchero '67-'69 Ranchero '70-'71 Falcon '70 Fairlane Torino '70-'71 Mustang '70-'73 Maverick '70-'77 (after 7-14-69) Comet '70-'77 Cougar '70-'73 Montego '70-'71
Allows you to change the Acura/Honda front upper ball joints without removing the control arm. Needed when changing over to adjustable ball joints.
This upper control arm for metric chassis is designed to be used with stock mount. Threaded for screw-in ball joint (91034323). Choose from 8" to 8-1/2" length. Cross shaft mount bolts center on center. Measurement is 6-7/8".
This upper control arm for metric chassis is designed to be used with stock mount. Threaded for screw-in ball joint (91034323). Choose from 8-1/2" to 9" length. Cross shaft mount bolts center on center. Measurement is 6-7/8".
These 4130 chromoly metric upper control arms are 40% stronger than standard control arms. They bolt to a stock mount and use the bolts in ball joints. Steel cross shaft. This control arm is going to have a 1/4" thick plate where the ball joint bolts in. Right arm is 8.0" long. Left arm is 8.5" long.
This upper control arm for metric chassis is designed to be used with stock mount.Threaded for screw-in ball joint (91034323). Choose from 8" to 8-1/2" length. Cross shaft mount bolts center on center. Measurement is 6-7/8".
This upper control arm for metric chassis is designed to be used with stock mount.Threaded for screw-in ball joint (91034323). Choose from 8-1/2" to 9" length. Cross shaft mount bolts center on center. Measurement is 6-7/8".
IMCA's 2004 rules now allow the stock car class to use spec tubular upper control arms. The stock arms are getting hard to find and don't have the strength of the tubular design. Bolts to your stock mount and accepts stock ball joints. This control arm is going to have a 1/4" thick plate where the ball joint bolts in. Mid-size GM metric only . Tube diameter is 1" Wall thickness is 0.092 Steel cross shaft. Available for right (passenger side) or left (drivers side). Right arm length is 8". ...
These strut type tubular steel upper control arms feature a steel cross shaft. They accept Moog K6024 or K6136 style bolt-in ball joints. These A-arms have a 6" center-to-center mounting bolt pattern. Length is measured from cross shaft centerline to ball joint center.
These strut style tubular steel upper control arms feature an aluminum cross shaft. They accept Moog K6024 or K6136 style bolt-in ball joints. Cross shaft bolt holes are on a 6" center. Length is measured from cross shaft centerline to ball joint center.