No items in Shopping Cart
7205857Overall Height1.500" (1 1/2")Outside Diameter2.200"Thread Pitch1/8" NPTCap Diameter1.540"Material TypeZincFinishChromeSold in QuantityEachNotesIncludes fittings to splice with 5/16" or 3/8" line.
56058500Overall Height1.500" (1 1/2")Outside Diameter2.200"Thread Pitch1/8" NPTCap Diameter1.570"Material TypeSteelFinishChromeNotesIncludes hardware to splice into 5/16" and 3/8" line. Adjustable from 1-6 lbs.
A dual purpose, universal regulator for EFI or Carbureted applications. Adjustable from 3 to 20 PSI with pressure that rises on a 1:1 ratio. All ports are 3/8" NPT, with one inlet and three outlets on the main body and one return port on the bottom. Bypass design provides the ultimate, dynamic fuel pressure control. Gasoline compatible only.
This kit provides a complete fuel system for GM LS-series and Chrysler Hemi engine swaps in muscle cars, street rods and off-road vehicles. These kits include an in-line Edelbrock electric fuel pump, regulator/fuel filter assembly, fuel pump relay and wiring assembly, fifteen feet of ProFlex hose, plus an assortment of hose ends, adapters and mounting hardware.
A stock fuel pressure regulator may be fine for some, but they are not designed for performance or adjustability. The Aeromotive 13109 regulator allows you to adjust fuel pressure from 40-75 psi and has a 1:1 boost referencing ratio if needed. It has two AN6 female o-ring inlet ports, and one outlet. There is also a 1/8" npt port to mount a gauge if desired.
Externally accessible pressure relief valves and repair kits are readily available. Not for use with fuel injection systems. Procomp "Black" electric fuel pump. Compatible with alcohol or methanol fuels. Flows 140 GPH (free flow). Pressure is pre-set at 9 PSI. A regulator is required. 3/8" NPT inlet and outlet.
Speedway fuel pumps are designed for street/strip application. Externally accessible pressure relief valves and repair kits are readily available. Not for use with fuel injection systems. Compatible with alcohol or methanol fuels. Flows 140 GPH (free flow). Pressure is pre-set at 9 PSI. A regulator is required. We recommend using the hose barbs included with the pump and 3/8" hose.
Edelbrock Victor Series billet aluminum mechanical fuel pumps are for high performance racing applications. The 5/8"-18 inlet and outlet come with -8AN fittings installed to provide increased flow over street fuel pumps, and the base can be rotated to allow for various fuel line configurations. These billet aluminum pumps produce 8.5-9 psi and require a pressure regulator.
Factory-setto 2.7 psi. Adjustablefrom 1 to 4 psi. Use with standard pump only, not recommended for maximum pressure pumps. Includes mounting bracket.This has a 3/8" NPT gauge port and requires 617-6157 reducer to install pressure gauge. 3/8" NPT inlet/outlet ports.
Add the finishing touch to your carb with this new billet adjustable fuel line! Fits all Holley 4150 based carburetors. Comes with both AN 6 and AN 8 fittings. 3/8" NPT outlet gives you more room for a regulator.
To make your LS1 transplant a little less painful, we put together these kits for you. If you don't have a fuel pump or need an external pump, order the filter/regulator/pump kit 910-12805.Kit includes required fuel rail fitting along with the filter/regulator assembly.Regulator pressure is fixed at 58 psi.Hose and additional fittings sold separately.
To make your LS1 transplant a little less painful, westock thisfilter/regulator assembly.Regulator pressure is fixed at 58 psi.Hose and additional fittings sold separately.
Speedway's Blue electric fuel pump with regulator is a max-pressure performance pump for gas applications only. The pressure is preset at 14 psi and the free capacity is 110 gph. It flows 70 gph while maintaining 9 psi. Regulator 91012803 is supplied. We recommend using the hose barbs included with the pump and 3/8" hose.
To make your LS1 transplant a little less painful, we put together these kits for you. If you already have a fuel pump in the tank, use the filter/regulator kit 910-12800. This kit includes a high pressure MSD in-line pump capable of 43 gph @ 40 psi or 39 gph @ 80 psi, a filter/regulator assembly, and all necessary fittings (including fuel rail fitting). Pump draws only 5.4 amps and supports up to 500 horsepower. Pump features 3/8" hose barb inlet and 5/16" barb outlet.