Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube.
Measures 32" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).
446-1232D Instructions (PDF)
These column drops are angle cut to fit the 1932 Ford dash. Fits steering columns with 1-3/4" O.D. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.
Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.
Mounting your steering column to the firewall or floor can be a real challenge. Ididit's billet aluminum ball swivel style mounts make this task much easier.Note: This mount may require slight modification to the I.D. of the ball or O.D. of the column end due to variation between manufacturers. It is not for chrome columns.446-4050 Instructions (PDF)
Mounting your steering column to the firewall or floor can be a real challenge. Ididit's billet aluminum ball swivel style mounts make this task much easier.
Note: This mount may require slight modification to the I.D. of the ball or O.D. of the column end due to variation between manufacturers. It is not for chrome columns.
446-4050 Instructions (PDF)
This steering wheel adapter allows you to put an aftermarket 3-bolt steering wheel on a 1969-1994 GM, Ididit or Flaming River steering column. Horn button not included. Includes black metal cover, horn button spring, spacer ring, plunger spring, lead wire and three mounting bolts. Adapter Application Chart (GIF) Note: When using this adapter, if the column has not previously had a steering wheel mounted, # 910-64049 will also be required. 410-3196 Instructions (PDF)
This steering wheel adapter allows you to put an aftermarket 3-bolt steering wheel on a 1969-1994 GM, Ididit or Flaming River steering column. Horn button not included. Includes black metal cover, horn button spring, spacer ring, plunger spring, lead wire and three mounting bolts.
Adapter Application Chart (GIF)
Note: When using this adapter, if the column has not previously had a steering wheel mounted, # 910-64049 will also be required.
410-3196 Instructions (PDF)
This polished billet aluminum steering wheel adapter allows you to put common 3-bolt steering wheels on Ididit and most 1969-1994 GM columns. This hub adapter comes with a spring for the horn button and a plunger/spring assembly.
This kit from Ididit offers security and a handsome appearance as well. Floor mount portion includes an adjustable mount with a polished aluminum trim ring with hardware. Then choose what color boot, part # 4462405-color you want and you have everything you need to complete the look. Black, Bone, Brown or Grey boots available. Select (1) column mount diameter needed. Select (1) boot color needed, part # 4462405-color. 446-2400 Instructions (PDF)
This kit from Ididit offers security and a handsome appearance as well. Floor mount portion includes an adjustable mount with a polished aluminum trim ring with hardware. Then choose what color boot, part # 4462405-color you want and you have everything you need to complete the look. Black, Bone, Brown or Grey boots available.
Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.
Note: Shift columns require a 2-1/4" hole and non-shift columns require a 2" hole.
Measures 30" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).
446-1230C Instructions (PDF)