If you are building a hot rod just a little bit different than the next guy you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom made-to-order lengths. Measurements are in assembled eye-to-eye lengths.To order:Use guide below to measure your finished length.The part number and length you order will be 3" longer than the sleeve you receive. (I.E. if you order a 48" part number you will receive a 45" long sleeve.) This is the difference in ...
If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom, made-to-order lengths. Measurements are in assembled eye-to-eye lengths. To order: Use guide below to measure your finished length. The part number and length you order will be 3" longer than the sleeve you receive. (I.E., if you order a 48" part number, you will receive a 45" long sleeve.) This is ...
Improved geometry drag link relocates the inner tie rod end to shorten both tie rod assemblies which improves steering geometry by reducing the excessive toe out that is common to GM Metric chassis during normal suspension travel (bump steer).'78-'88 Monte Carlo G-BodyInstructions (PDF)
We stock these hard to find tie rods, idler arms and center links.
We stock these hard to find tie rods idler arms and center links.