Clean up your LS1 intake manifold with this billet aluminum cable bracket. Available with a single stud for throttle only or a double stud to add cruise control cable. Designed to work with part #491-1000LS1.
Direct replacement for a throttle cable bracket on the '99-'02 Yamaha R6 carburetor These brackets are no longer available from Yamaha More like the OEM bracket and features a double loop for two throttle cables
Chrome plated, fully adjustable throttle cable bracket bolts to the corner of most 2bbl. or 4 bbl. cabruretors. Steel bracket locks in place and won't swivel. Works with OEM cable housings that have square plastic ends which snap into the bracket holes.
These Ford EFI Brackets fit 1986 to 1993 Ford 302 and 351 electronic fuel injection systems that have installed the Mustang EGR spacer. This Stainless Bracket mounts in stock location for easy installation of Lokar Kickdown Cables and Throttle Cables. (1986 to 1993 uses 4911000HT-24) 1986 to 1993 Ford 302 and 351 electronic fuel injection systems with Mustang EGR spacer Mounts in stock location for easy installation of Lokar Throttle Cable (4911000HT) Note: The EFI Bracket does not fit B.A.P. throttle bodies.
Direct replacement for a throttle cable bracket on the '99-'02 Yamaha R6 carburetorThese brackets are no longer available from YamahaFeatures a single loop and a small hole for a return spring to be installed
Clean up your LS1 intake manifold with this billet aluminum cable bracket. Available with a single stud for throttle only or a double stud to add cruise control or kickdown cable. Designed to work with part #491-1000LS1.
These Ford EFI Brackets fit 1986 to 1993 Ford 302 and 351 electronic fuel injection systems that have installed the Mustang EGR spacer. This Stainless Bracket mounts in stock location for easy installation of Lokar Kickdown Cables and Throttle Cables. (1986 to 1993 uses 4911000HT-24) 1986 to 1993 Ford 302 and 351 electronic fuel injection systems with Mustang EGR spacerMounts in stock location for easy installation of Lokar Throttle Cable (4911000HT) Note: The EFI Bracket does not fit B.A.P. throttle bodies.
These Lokar stainless throttle cable brackets mount to the rear of your Holley Edelbrock AFB Quadrajet or inline dual carburetors. These brackets are used to mount Lokar's throttle cable and kickdown assemblies.Mounts to carburetor baseAccepts Transmission Kickdown CableAccepts Throttle Return SpringReturn Spring IncludedHardware IncludedStainless steel bracketBlack powdercoatedSold individually
Stainless bracket mounts to rear of Holley Edelbrock AFB Quadrajet Demon and In-Line Dual Quads. Stainless bracket and dual stainless springs are used to mount Lokar’s Throttle Cable and Kickdown kits. Design provides improved clearance on Edelbrock carbs. Includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable such as with a 700-R4 transmission.Mounts Lokar Throttle Cables and Kickdowns for a nice clean setup. Includesallen wrench to adjust the set screw.
These bracket kits are Lokar's answer to LT1 cable problems. Stainless throttle and kickdown brackets replace factory brackets. Kit includes stainless arm to mount on LT1 throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port Throttle Cables and Tuned-Port Kickdowns. Stainless throttle and kickdown brackets Replace factory brackets Includes stainless arm to mount on LT1 throttle body to operate kickdown Designed to be used with Lokar's Tuned-Port Throttle Cables and Tuned-Port Kickdowns (see below for part #s)
Stainless bracket mounts to rear of Holley Edelbrock AFB Quadrajet Demon and In-Line Dual Quads. Design provides improved clearance on Edelbrock carbs. Design includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable such as with a 700-R4 transmission.Mounts to rear of Holley Edelbrock AFB Quadrajet Demon and In-Line Dual QuadsStainless steelImproved clearance on Edelbrock carbs Includes tension screw to prevent bracket movement under extreme pressure49104001 Installation Instructions (PDF)
Stainless steel carburetor brackets.
This slick billet aluminum bracket mounts at the back of the rear carb on your Barry Grant Six Shooter setup and makes the throttle cable, return spring and kickdown cable mounting easy. CNC machined from 6061-T6 billet aluminum for strength and style Easy installation of Lokar Throttle Cable and Kickdown kits Dual Stainless Steel Return Springs All hardware and detailed mounting instructions included Utilizes existing SixShooter Progressive Linkage
Chrome plated fully adjustable throttle cable and automatic transmission kickdown cable bracket bolts to the corner ofmost 2bbl. or 4 bbl. carburetors.Steel bracket locks in place andwon't swivel. Works withOEM cable housings that have square plastic ends which snap into the bracket holes.
This slick billet aluminum bracket mounts at the back of your Edelbrock carb and makes throttle cable, return spring and kickdown cable mounting easy. Includes zinc coated allen head bolts measuring 1-1/2" in length. CNC machined from 6061-T6 billet aluminum for strength and style Bracket designed to fit single or dual quad carbs Easy installation of Lokar Throttle Cable and Kickdown kits Dual Stainless Steel Return Springs All hardware and detailed mounting instructions included Recommended by Edelbrock Attaches to both rear and carb bolts to eliminate bracket movement Bracket utilizes ...
Direct replacement for '99-'02 Yamaha R6 carbsNo longer available from YamahaUse in conjunction with either 961-2121 or 961-2122
This fuel log supplies fuel to two Edelbrock carbs when used on Edelbrock dual-quad intake manifolds. Adjustable 6-7/16" to 9" center-to-center1/8" NPT fuel pressure port3/8" NPT fuel inlet
Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads. Design provides improved clearance on Edelbrock carbs. Design includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission. Mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads Stainless steel Improved clearance on Edelbrock carbs Includes tension screw to prevent bracket movement under extreme pressure 49104001 Installation Instructions (PDF)
Throttle Cable Bracket, Manifold Mounting. For Edelbrock Performer or Performer AVS Carbs . Black anodized Billet aluminum Bracket Mounts to intake manifold Accepts Transmission Kickdown Cable Accepts Throttle Return Spring Return Spring NOT Included Hardware NOT Included
Use this bracket to attach the hi-tech throttle and kickdown cable to your GM Tuned Port Injection unit.
Direct replacement for a throttle cable bracket on the '99-'02 Yamaha R6 carburetor These brackets are no longer available from Yamaha Features a single loop and a small hole for a return spring to be installed
These brackets fit the GM Ramjet 350 engine. These brackets along with Lokar Throttle Cables will allow the ramjet to work properly in any vehicle. When used with an automatic transmission, be sure to use the transmission specific Lokar Kickdown Cable. GM Ramjet 350 engine Allows the Ramjet to work properly in any vehicle