Menu

Shop

Garage

Cart

Account

Products to Compare (max of 3)
X
Compare These Parts

Speedway Tech Talk - Hooker's Maximum Flow Single 3-Inch Muffler

8/11/2016
Add Article To List

Pat brought his 1964 Chevy Impala out to give us all a chance to hear the exhaust he has on it.

Speedway carries everything from Flowmaster to Dynatech to Hooker Exhaust. Pat’s ’64 has an LS 6.0 with an LS6 cam exhaling through 3 inch pipes that terminate in the Hooker Max Flow 3 inch muffler.

Enjoy a minute or so of throaty LS rumble, and then take a look at all the various exhaust components available at Speedway Motors by clicking here.

Products Featured in this Article

Related Articles

Speedway Tech Talk - LS Wired!
by Pat Orth - Posted in Videos
11/17/2016
Pat shows off how easy wiring your LS can be with our LS wiring kit.
Speedway Tech Talk - LS Fuel Delivery Kit Questions
by Pat Orth - Posted in Videos
11/10/2016
Pat answers some commonly asked questions about the MSD LS fuel delivery kit and shows basic installation tips.
Speedway Tech Talk - LS1 Fuel Delivery Kit
by Pat Orth - Posted in Videos
10/13/2016
Pat talks about one of our LS1 fuel delivery kits.
Speedway Tech Talk - LS Oil Pans
by Pat Orth - Posted in Videos
9/29/2016
A look at some LS Oil Pans for your swap project. Our video guide walks you through some great options.
Speedway Tech Talk - LS Engine Mounts
by Pat Orth - Posted in Videos
7/28/2016
Pat talks about some of the LS engine mounts Speedway Motors has to offer.
Speedway Tech Talk - Lokar Throttle Cable/Pedal Setup
by Pat Orth - Posted in Videos
7/14/2016
Pat talks about some of our Lokar throttle cable and pedal setups.
Speedway Tech Talk - EFI Fuel Tanks
by Pat Orth - Posted in Chevy Bel Air
5/28/2016
Pat talks about our Tanks Inc. EFI fuel tanks.
Speedway Tech Talk - Air Ride Setup
by Pat Orth - Posted in Videos
10/27/2016
Pat shows how his air ride is setup in his 1964 Impala.
In-Tank LS Swap Fuel Pump: Heart of an EFI Conversion Fuel System
by Joe McCollough - Posted in Videos
12/21/2023
What's the best way to handle an LS swap fuel pump? Watch for some tips and tricks as we assemble the in-tank pump to feed our 5.3-powered C10 truck project.
Assembly and Engine Start | 1968 C10 Build Episode 8
by Joe McCollough - Posted in Videos
10/23/2023
It's alive! Our 1968 C10 truck project is one step closer to our first drive. In this episode, our old truck finally comes to life with a cammed junkyard LS.