Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Tempered Spring Steel, 40 Ft.

Specs
Material Type:
Steel
Overall Width:
1.00
Overall Length:
40.00
Sold in Quantity:
Each
Finish:
Natural
Material Thickness:
.06
Tempered Spring Steel, 40 Ft.Tempered Spring Steel, 40 Ft.Tempered Spring Steel, 40 Ft.
Tempered Spring Steel, 40 Ft.

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

  • Hardened and tempered
  • 40' roll
  • 1" Wide
  • .062" Thick
  • Great for making body braces

You may also be interested in:

Tempered Spring Steel, 100 Ft.
(Part #91006220)
                        
  • Hardened and tempered
  • 100' roll
  • 1" Wide
  • .062" Thick
  • Great for making body braces
Pre-Cut Spring Steel
(Part #91006214)
                        This spring steel is pre-cut to your specified length for your next project.  Made from tempered steel and hardened for durability.
  • Pre-cut lengths available from 6 to 30” in 2” increments
  • Lengths referenced are from center hole to center slot points
  • Sold individually
  • Drilled and slotted
  • Hardened and tempered
  • 1” wide
  • 0.062” thick
Aluminum Angle Body Bracing, 90 Degree, Drilled, 66 Inch
(Part #91054022)
                        

Speedway Motors offers drilled aluminum angle body bracing to help ease the installation of body panels on your race car. The heavy duty 8 GA (.1285") thick, 1" wide aluminum angle has a 90 degree bend that provides a square mounting support between body and chassis. Pre-drilled holes save you time and make attaching body panels a breeze. Works great for added spoiler support as well.

  • 8 GA (.1285") thick
  • 1" wide
  • 66" long
  • 90 degree bend
  • Drilled

 

Aluminum Angle Body Bracing, 90 Degree, Drilled, 26 Inch
(Part #91054024)
                        Speedway Motors offers drilled aluminum angle body  bracing to help ease the installation of body panels on your race car.  The heavy duty 8 GA (.1285") thick, 1" wide aluminum angle has a 90  degree bend that provides a square mounting support between body and  chassis. Pre-drilled holes save you time and make attaching body panels a  breeze. Works great for added spoiler support as well.
  • 8 GA (.1285") thick
  • 1" wide
  • 26" long
  • 90 deg. bend
  • Drilled
Aluminum Angle Body Bracing, 90 Degree, Drilled, 10 Inch
(Part #91054026)
                        Speedway Motors' offers drilled aluminum angle body  bracing to help ease the installation of body panels on your race car.  The heavy duty 8 GA (.1285") thick, 1" wide aluminum angle has a 90  degree bend that provides a square mounting support between body and  chassis. Pre-drilled holes save you time and make attaching body panels a  breeze. Works great for added spoiler support as well.
  • 8 GA (.1285") thick
  • 1" wide
  • 10" long
  • 90 deg. bend
  • Drilled
Aluminum Angle Body Bracing, 120 Degree, Drilled, 26 Inch
(Part #91054028)
                        

Speedway Motors' offers drilled aluminum angle body bracing to help ease the installation of body panels on your race car. The heavy duty 8 GA (.1285") thick, 1" wide aluminum angle has a 120 degree bend to provides a solid mounting surface between body and chassis. Pre-drilled holes save you time and make attaching body panels a breeze. Works great for added spoiler support as well.

  • 8 GA (.1285") thick
  • 1" wide
  • 26" long
  • 120 deg. bend
  • Drilled

 

Spring Steel Punch
(Part #91006211)
                        
  • Place on a hard surface and strike lightly with a 3 to 4 lb hammer
  • Punches 1/4” diameter hole, 1/2” from the end of 1” x 1/16” thick spring steel material
  • Built-in stop positions material for accurate hole placement