This adjustable panhard bar axle mount clamps to 3" axle tubes and gives you 3" of adjustment. Works with 916-45580 panhard bar. Stud is 3/4". Steel.
This slick mount lets you change the length of your panhard bar with ease. Fits 2" x 2" square tube and has steel insert in the middle hole so the threads won't pull out. This is set up for 3/4" bolts.
This slick mount lets you change the length of your panhard bar with ease. Fits 1-1/2" x 1-1/2" square tube and has steel insert in the middle hole so the threads won't pull out. This is set up for 3/4" bolts.
AFCO 9" Ford Steel Panhard Bar Mount Allows you to move the bar 5/8" per hole, not 1"+ like most For 3/4" rod ends Clearance item!! NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS
These panhard bar mounts make it easy to adjust or change your set-up. They each have two 1/2" mounting bolts and accept a 3/4" panhard bolt. Dual pick-up points.
For triangulated rear four bar Upper four bar mount tab for rear end housing For 3" axle tube
Upgrade relocate and repair with these 4130 bosses.
Trianglated rear 4 link kit made for '33-'34 Fords that fits a 3" axle tube. Mounts the forward brackets to the inside of your frame and eliminates the use of a Panhard bar. Adjustable bars feature urethane bushing rod ends. Three-position adjustable shock mount makes it easy to set the proper ride height. Sold as a kit. This is Garage Sale priced because it does not include all mounting hardware. Kit does NOT include: Qty. 1: 5/8 Bolt 1 Qty 3: 5/8 Nylock Nuts Qty 3: ...
This Mr. Roadstar Rear Panhard Bar is used to control the side-to-side movement of the rear axle. This is necessary when using a parallel 4-bar or hairpin radius rod rear suspension. The bar is threaded on one end for length adjustment and is welded on opposite end. This will require one end to be unbolted to allow for the length adjustment. Kit includes: Axle Bracket (for 8" or 9" Ford) Bar with Urethane bushed Stainless adjuster - 20" eye-to-eye 910-49800 Instructions (PDF) This is Garage Sale priced because it ...
These rear shock crossmembers are bolt-in style and are designed to work with 1935-40 Fords. They bolt directly to the rear frame rails to allow you to mount your shocks safely and securely. For 1935-40 Fords Bolts into rear frame rails Mount your shocks safely and securely Steel construction
These rear shock crossmembers are bolt-in style and are designed to work with 1935-40 Fords. They bolt directly to the rear frame rails to allow you to mount your shocks safely and securely.For 1935-40 FordsBolts into rear frame railsMount your shocks safely and securelySteel construction
For triangulated rear four-bar Weld onCombo lower four bar & coilover mountsFor 3" axle tubes
Investment cast stainless steel. For axles with 2-1/4" boss (spacer required for 2" axle boss). Four-bar mount center-to-center is 4-1/2".Has 1/2-20" threaded hole for panhard bar or sway bar mounting.
For triangulated rear four barUpper four bar mount tab for rear end housingFor 3" axle tube