No items in Shopping Cart
Available in lengths of 28", 30", 32", or 33" long from steering wheel base to end of their 1" Double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).
These steering column features a 1-3/4" polished stainless steel tube, real ball bearings for smooth shaft operation and a polished aluminum quick release hub that will accept the common Grant steering wheel 3-bolt pattern. It just doesn't get any cooler than this!
These new tilt steering columns are designed to be a bolt-in replacement for 1967-1968 Camaros. They include a wiring harness adapter and accept common 1969-up GM steering wheels or adapters.
These Speedway steering columns feature a polished stainless steel housing with a 1-3/4" diameter tube and 3" bell. They work with standard 3-bolt steering wheels. Steering shaft has a 3/4" Double-D end.
These columns have the same dimensions and features as the Ididit columns available on this website, but are only 16" long instead of 30".
Make your 1957 Chevy more comfortable to drive byinstalling a new Ididit steering column. Ididit tilt steering columns with no shifter willmove the steering wheel back 2" towards the driver. Columns usethe common 1969 and up GM wheel adapters. Choose plain paintable steel or chrome finish.
1967-68 Camaro1967-68 ChevelleFloor ShiftTilt ColumnBrushed Raw Steel
These universal tilt steering columns have all the features you are looking for but at a cost you can afford. They accept a 1" DD u-joint and the common '69-'94 GM steering wheels or adapters. The wiring uses the GM 4-1/4" connector. The shifter columns include the shift indicator and a straight and offset shifter arm
These universal 5-way adjustable tilt steering columns have all the features you are looking for, but at a cost you can afford. They accept a 1" DD U-joint and the common '69-'94 GM steering wheels or adapters. The wiring uses the GM 4-1/4" connector.Uses a 2" hole column drop.These shifter columns include the shift indicator and a straight and offset shifter arm. Works with 3 or 4 speed automatic transmissions. These do not have the 4 way flasher button.
Now you can update your 1955-57 Chevy car with a tilt wheel column. Available in paintable or chrome finish, and with or without a shifter. They accept a 1" DD u-joint or coupler and '69-'94 GM steering wheels or adapters. Keep in mind that a tilt column will move the steering wheel back about 2". '55-'57 Steering Column Instruction Sheet (pdf)
Now you can update your 1955 or 1956 Chevy passenger car with a 5-way adjustable tilt wheel column.They accept a 1" DD U-joint or coupler and '67-'94 GM steering wheels or adapters. Keep in mind that a tilt column will move the steering wheel back about 2".If you are using a stock steering box you will have to modify it to accept a 3/4" DD.
These universal 5-way adjustable tilt steering columns have all the features you are looking for, but at a cost you can afford. They accept a 1" DD U-joint and the common '69-'94 GM steering wheels or adapters. The wiring uses the GM 4-1/4" connector. Uses a 2" hole column drop.
Now you can update your 1957 Chevy passenger car with a 5-way adjustable tilt wheel column.They accept a 1" DD U-joint or coupler and '67-'94 GM steering wheels or adapters. Keep in mind that a tilt column will move the steering wheel back about 2".If you are using a stock steering box you will have to modify it to accept a 3/4" DD.Made from stainless steel tubing available in a paintable or chrome finish, without a shifter.Instruction(PDF)
Now you can update your 1955 or 1956 Chevy passenger car with a 5-way adjustable tilt wheel column.They accept a 1" DD U-joint or coupler and '67-'94 GM steering wheels or adapters. Keep in mind that a tilt column will move the steering wheel back about 2".If you are using a stock steering box you will have to modify it to accept a 3/4" DD.Made from stainless steel tubing available in a paintable or chrome finish, with a transmission shifter.Note:These columns are for use with 3 or 4 speed automatics ...
Now you can update your 1957 Chevy passenger car with a 5-way adjustable tilt wheel column.They accept a 1" DD U-joint or coupler and '67-'94 GM steering wheels or adapters. Keep in mind that a tilt column will move the steering wheel back about 2".If you are using a stock steering box you will have to modify it to accept a 3/4" DD.Made from stainless steel tubing available in a paintable or chrome finish, with a transmission shifter.Note:These columns are for use with 3 or 4 speed automatics (P-R-N-D-L) and ...
Wouldn't it be nice to have a tilt column in your Mustang and still be able to use your original steering wheel? These columns bolt to the original dash mount and include a new lower column mount.The wiring is also easy to hook-up.Requires you to modify the original input shaft on the steering box and you will need the coupler that is sold separately.
Wouldn't it be nice to have a tilt column in your Mustang and still be able to use your original steering wheel? These columns bolt to the original dash mount and include a new lower column mount.The wiring is also easy to hook-up.Column is a straight bolt-in when used with the new rag joint (also sold separately).
We now have an affordable steel version of our famous hot rod steering column. The 1-3/4" black painted column still has a quick release steel hub that accepts the common 3-bolt Grant steering wheel pattern and uses common 3/4" DD u-joints.15 gauge mild steel.
Economical mounting solution for T-bucket steering columns.
If you have ever crashed hard you know the steering column can leave a big dent in your chest. Sweet Mfg. collapsible steering columns are not only safer but much easier to install. Includes easy installation steering wheel disconnect and 3/4" mounding rod end.
If you have ever crashed hard you know the steering column can leave a big dent in your chest. Sweet Mfg.collapsible steering columnsare not only safer but much easier to install. Includes easy installation steering wheel disconnect and 3/4" mounding rod end.
If you have ever crashed hard, you know the steering column can leave a big dent in your chest. These collapsible steering columns are not only safer, but much easier to install. Includes easy-install steering wheel disconnect and 3/4" mounting rod end. Adjustible from 22-1/2" to 32" in length.
Steering column bracket welds to roll cage. 8" long overall, .100" steel, 3/4" slot.
Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. All of these steering u-joints have 3/4 weld-on ends. Joints available for round or double D shaft.
Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.
Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount.No-shift columns use 1" DD U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.
Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount.Column uses 3/4"-36 spline U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.
Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. No-shift columns use 1" DD U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.
Now you can update your 1955-57 Chevy car with a tilt wheel column. Available in paintable or chrome finish, and with or without a shifter. They accept a 1" DD u-joint or coupler and '69-'94 GM steering wheels or adapters. Keep in mind that a tilt column will move the steering wheel back about 2".'55-'57 Steering Column Instruction Sheet (pdf)
Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our couple 446-5249.
Wouldn't a tilt column be nice in your 1947-1954 Chevy/GMC pickup? These Ididit columns are a bolt-in job that comes with the column drop and floor mount. The wiring is the standard 3-7/8" GM style and they have the common 1" DD shaft. If you are running a stock steering box you will have to modify the shaft to 3/4" DD and use our coupler 446-5249.