Shock of choice for Wissot and UMP racersIncludes steel cap with Schrader ValveRebuildable: shock can be assembled and disassembled for rapid repair or valving changeNickel plated for rapid heat dissipationWorld class performance at a SN (Saturday Night) price!Bilstein's famous consistent fade-free performanceValve stacks and valving kits available separatelyCoilover kit sold separately46mm (1.81") diameter steel body Steel Cap with Schrader Valve7" Stroke Designed for but not limited to: Modifieds Late Models and Sprint Cars.
Shock of choice for Wissot and UMP racersSteel cap with Schrader valveRebuildable - shock can be assembled and disassembled for rapid repair or valving changeNickel plated for rapid heat dissipationWorld class performance at a SN (Saturday Night) price!Bilstein's famous consistent fade-free performance46mm (1.81") diameter steel bodyValve stacks and valving kits available separatelyCoil-over kit sold separatelyDesigned for but not limited to: Modifieds Late Models and Sprint Cars.
Twin Tube DesignStock Mount2” O.D. Steel BodyPrecision Machined Piston with P.T.F.E. Piston Band15mm Centerless Ground Hard Chrome Plated Solid Piston RodDeflective Disk ValvingRacer Revalveable and RebuildableLinear Piston100% Dyno Tested and SerializedCustom valving is available
Pro Steel small body shocks have a non-adjustable zinc plated gas cell shock.Carbon steel shaft is chromed and centerless ground for longer seal life.Features a unique 1/2" removable bearing mount. Shocks are sold less bearing ends. OK for use with coil overs. 1.63 diameter. 5" Stroke -- Compression Length: 10.65" Extension Length: 15.65" Pro Small Steel Shock Chart Application(GIF)
Pro Steel small body shocks have a non-adjustable zinc plated gas cell shock. Carbon steel shaft is chromed and centerless ground for longer seal life. Features a unique 1/2" removable bearing mount. Shocks are sold less bearing ends. OK for use with coil overs. 1.63 diameter. 5" Stroke -- Compression Length: 10.65", Extension Length: 15.65" Pro Small Steel Shock Chart Application (GIF)
Twin Tube Design Stock Mount 2” O.D. Steel Body Precision Machined Piston with P.T.F.E. Piston Band 15mm Centerless Ground, Hard Chrome Plated, Solid Piston Rod Deflective Disk Valving Racer Revalveable and Rebuildable Linear Piston 100% Dyno Tested and Serialized Custom valving is available
Pro's new TA series steel shocks feature a gas cell and are IMCA approved. The TA series will work with the coil over kits. You must order end separately.Comp. Length: 12-1/2"Ext. Length: 19-1/2"Pro Steel Shocks Chart Application (GIF)
Pro's new TA series steel shocks feature a gas cell and are IMCA approved. The TA series will work with the coil over kits. You must order end separately.Comp. Length: 14-1/2"Ext. Length: 23-1/2"Pro Steel LB Shocks Chart Application (GIF)
AFCO R-Series Twin-Tube Shocks are packed with quality performance and value all inside a rebuildable steel body.All internal parts of the AFCO Steel Take-A-Part shocks are identical to the components inside the aluminum body shocks so you can expect the highest levels of performance and durability.AFCO Steel Body Take-A-Part Shocks let you meet your "steel shock rule" and still allow you to run the most precise shock in the industry.With the Take-A-Part you are no longer limited to "off the shelf valves " and you can have the performance of ...
This shock has 5/8" mounting holes. It has a mounting length of 13.3" and has a 5" stroke. We only have the one and it is missing the cone if you are trying to run it as a coilover. Actual photo! NO WARRANTY NO RETURNS ON GARAGE SALE ITEMS
These steel-bodied Pro Gas mono-tube shocks from Pro Shocks have a state-of-the-art design with a high-tech floating piston that avoids dumping and cavitation. They are the only gas shocks that can be run with high gas pressure as well as any amount of low pressure all the way down to zero. In fact Pro Gas shocks will continue to provide 100% dampening even with a loss of gas pressure. This 9" stroke length hasa variety of dampening rates. Compressed Length: 14-1/2"Extended Length: 23-1/2"Rebuildable and revalvable through Pro Shocks!
These steel-bodied Pro Gas mono-tube shocks from Pro Shocks have a state-of-the-art design with a high-tech floating piston that avoids dumping and cavitation. They are the only gas shocks that can be run with high gas pressure as well as any amount of low pressure all the way down to zero. In fact Pro Gas shocks will continue to provide 100% dampening even with a loss of gas pressure. This 7" stroke length has a variety of dampening rates. Compressed length: 12-1/2"Extended Length: 19-1/2"Rebuildable and revalvable through Pro Shocks!
Shock of choice for Wissot and UMP racers Includes steel cap with Schrader Valve Rebuildable: shock can be assembled and disassembled for rapid repair or valving change Nickel plated for rapid heat dissipation World class performance at a SN (Saturday Night) price! Bilstein's famous consistent, fade-free performance Valve stacks and valving kits available separately Coilover kit sold separately 46mm (1.81") diameter steel body Steel Cap with Schrader Valve 7" Stroke Designed for, but not limited to: Modifieds, Late Models, and Sprint Cars.
Shock of choice for Wissot and UMP racers Steel cap with Schrader valve Rebuildable - shock can be assembled and disassembled for rapid repair or valving change Nickel plated for rapid heat dissipation World class performance at a SN (Saturday Night) price! Bilstein's famous consistent, fade-free performance 46mm (1.81") diameter steel body Valve stacks and valving kits available separately Coil-over kit sold separately Designed for, but not limited to: Modifieds, Late Models, and Sprint Cars.