No items in Shopping Cart
This brake line kit bridges the gap between our stainless steel -3 ANkit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3ANfittings to plumb your brake lines.
Includes 20 ft. roll of steel 3/16" brake line, four 18" stainless steel braided AN 3 brake lines and common 45 degree double flare fittings to plumb your brake lines.
You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares. This brake line kit includes a 25 foot roll of 3/16" mild steel brake line, four 18" stainless steel braided -3 ANbrake hoses, four brake line mount tabs and clips, two 3/8"-24 inverted flare T-fittings, four 3/8"-24 IFF to -3ANmale adapters, six 3/8"-24 IFF ...
Select applicable length. AN size is the "-#" at the end of each part number.
Stainless steel braided line available in AN6, 8, 10, and 12. This stainless line can also be used for low pressure applications like fuel, water, air or oil. Not to be used for brake or power steering applications.
DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
DOT approved brake line kits include two stainless steel -3 ANbrake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
This 3/16" O.D. tubing is thick walled and is very easy to bend when using a lever-type tube bender. Each end has a 45 double flare with a 3/8"-24 male fitting. Seven different lengths available.
Our 3/16" stainless steel tubingis made from304 grade (rated at 6000 psi)which is double annealedto alloweasy flaring.
Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.
Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includesbrake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steeringarms, tie rod assembly and hardware.
Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includesbrake kit, spindles, dust caps, spindle nuts, AN3 caliper fittings, Rubber Brake Lines, kingpins, flat steeringarms, tie rod assembly and hardware.
Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includesbrake kit, rubber brake lines, spindles, dust caps, spindle nuts, AN3 caliper fittings, kingpins, flat plate steeringarms, tie rod assembly and hardware.
If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment.