These steel alternator brackets mount in the same location that the generator did, but allows you to run the common GM Delco style alternator. You should even be able to run the same belt length as the original.
Fabricated from mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Accepts Sanden or Sankyo 508 A/C unit and stock GM alternators and power steering pumps. For use with '55-'68 short-style water pumps only. Not for use with Vortec cylinder heads.
Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Mounts using only the water pump and intake manifold bolts. Accepts stock GM Delco 10-SI (1970-1989 style) alternators. Designed for use with short water pumps Works with stock steel or aluminum aftermarket pulleys Available in chrome or black painted
Fabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Mounts using only the water pump and intake manifold bolts. Accepts Sanden or Sankyo 508 A/C unit and stock GM Delco 10-SI (1970-1989 style) alternators. Designed for use with short water pumps Works with stock steel or aluminum aftermarket pulleys Available in chrome or black painted
Steel bracket mounts Delco alternators beside oil pan at left front corner (driver side) of 396-454 big block Chevy V8s. Uses early front motor mount holes. Works with the short water pump Will NOT work with Speedway T-Bucket frames (too narrow) Measures 10.3" to 12.3" from centerline of crankshaft to outside edge of alternator
Chrome plated steel bracket mounts Delco alternators beside oil pan at left front corner (driver side) of 396-454 big block Chevy V8s. Uses early front motor mount holes. Works with the short water pump Will NOT work with Speedway T-Bucket frames (too narrow) Measures 10.3" to 12.3" from centerline of crankshaft to outside edge of alternator
For Small Block Chevy with short water pump. Fabricated from mild steel, with all stainless fasteners. Accepts stock GM alternator. Simple installation. Attaches to accessory bolt holes on front face of head. Available in black or chrome. S/B Chevy Alternator Bracket Illustration
Steel bracket mounts Delco alternators beside oil pan at left front corner (driver side) of 396-454 big block Chevy V8s. Uses early front motor mount holes.Works with the short water pumpWill NOT work with Speedway T-Bucket frames (too narrow)Measures 10.3" to 12.3" from centerline of crankshaft to outside edge of alternator
Chrome plated steel bracket mounts Delco alternators beside oil pan at left front corner (driver side) of 396-454 big block Chevy V8s. Uses early front motor mount holes.Works with the short water pumpWill NOT work with Speedway T-Bucket frames (too narrow)Measures 10.3" to 12.3" from centerline of crankshaft to outside edge of alternator