ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Stainless Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends, Custom Length

Free Shipping Free Shipping
Stainless Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends, Custom Length

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a kit.
  • Item 91632516 is made to order. We will ship it from our warehouse when it is produced.

Details

Reviews

Q & A

What's in the Box

These tie rod or drag link kits are pre-cut and tapped lengths of 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

Specify desired length in comments section of shopping cart. No returns/exchange on custom length links. Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3-1/2" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

Measuring Tie Rod or Drag Links (GIF)

Tapered Steering Arm Illustration (GIF) 

Note: Always use anti-seize to prevent galling the treads during final installation. 

Item Details

w/ Plain tie rod ends

Customer Reviews

This product has no reviews.

Product Q&A

0 questions : 0 answers

No questions have been asked.

You may also be interested in:

Plain Finish Cross Steering Tie Rod End, 11/16-18 LH Threads
(Part #91002999)
                        Cross steering means the drag link reaches across the car and attaches to the passenger-side steering arm. If that steering arm has only one hole, you'll need to build the tie rod with this tie rod end on the RH side. Then the drag link attaches to the eyelet (which is tapered 1/2 way from both sides.) 
  • Not for use with flat steering arms
  • Use only with Ford type steering arms with a tapered hole
  • Not normally used with Chevy spindles

Note: When using the cross steering end, the tube length will need to be 6" shorter than the eye-to-eye length. Example: A 46" kit will need 40" tube length.

Stainless Tie Rod/Drag Link Kit with Plain 11/16 Tie Rod Ends
(Part #91632506)
                        

These tie rod or drag link kits are pre-cut and tapped lengths of 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

Measuring Tie Rod or Drag Links (GIF)

Tapered Steering Arm Illustration (GIF) 

Note: Always use anti-seize to prevent galling the treads during final installation. 

Item Details

w/ Plain tie rod ends
Plain Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends, Custom Length
(Part #91632514)
                        

These tie rod or drag link kits are pre-cut and tapped lengths of 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

Specify desired length in comments section of shopping cart. No returns/exchange on custom length links. Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3-1/2" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

  • Precut and tapped lengths of 7/8" O.D. tubing
  • Available in these assembled lengths: 25.5", 28.5", 30", 32", 42.5", 44", 45", 46", 48", 52.5", and 54"
  • Complete with 11/16" tie rod ends and jam nuts
  • Adjustable from 1/2" shorter to 3/4" longer
  • Available in plain steel
  • All lengths measured eye-to-eye

Measuring Tie Rod or Drag Links (GIF)

Tapered Steering Arm Illustration (GIF) 

Note: Always use anti-seize to prevent galling the treads during final installation.

Note: Custom length: No C.O.D. or return/exchange

 

Stainless Tie Rod/Drag Link Kit with 11/16 Tie Rod Ends, Custom Length
(Part #91632517)
                        

These tie rod or drag link kits are pre-cut and tapped lengths of brushed stainless 7⁄8" O.D. tubing available in a custom length. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3-1/2" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

Note:  Please indicate and provide your required eye to eye length needed in the comments box located on the checkout page.

Measuring Tie Rod or Drag Links (GIF)

Tapered Steering Arm Illustration (GIF) 

Note: Always use anti-seize to prevent galling the treads during final installation. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

Chrome Cross Steering Tie Rod End, 11/16-18 LH Threads
(Part #91003000)
                        

Cross steering means the drag link reaches across the car and attaches to the passenger-side steering arm. If that steering arm has only one hole, you'll need to build the tie rod with this tie rod end on the RH side. Then the drag link attaches to the eyelet (which is tapered 1/2 way from both sides.)

  • Not for use with flat steering arms
  • Use only with Ford type steering arms with a tapered hole
  • Not normally used with Chevy spindles

Note: When using the cross steering end, the tube length will need to be 6" shorter than the eye-to-eye length. Example: A 46" kit will need 40" tube length.

Lubrication Engineers 3752 LE Almagard Industrial Grease, 14.5 Oz
(Part #4983752)
                        

Multifunctional grease designed for exceptional mechanical stability, excellent extreme pressure and high temperature capabilities. Won't wash off, pound out, or melt and run, even with extended service in severe conditions.

  • Use in all types of vehicles, on and off road, as well as in many in-plant applications
  • Very tacky
  • Excellent water resistance
  • Will not pound out
  • Rust and corrosion inhibited
  • Extremely versatile
  • Excellent oxidation resistance and rust protection
  • Great oxidation stability and longer life, does not "work down" in service
  • High dropping point
  • Good heat reversion
  • Does not harden on aging, easily pushed out by fresh grease
  • Timken OK load of 70 lbs
  • Bearing life may be extended up to three times with cooler operation
  • Reduces downtime and maintenance labor because of smooth, cool performance
  • Works great for chassis, wheel bearings, U-joints

LE Almagard Data Sheet (PDF)