Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®


Stainless Steel HighBoy Front Shock Mounts

SAME DAY SHIPPING! Order within the next 9 hours 36 minutes and receive same day shipping

Material Type:
Stainless Steel
Sold in Quantity:
Center to Center:
Garage Sale:
Stainless Steel HighBoy Front Shock Mounts

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a pair.



Q & A

What's in the Box

These stainless steel upper front shock mounts measure 4" from the top bolt hole to the centerline of the stud.  Mounting bolts are spaced at 2-5/16" on center.

Shocks bushing and stainless steel hardware is included.

You may also be interested in:

1948-52 Ford F1 Forged Upper Shock Mounts, 5-1/2 Inch
(Part #91036008)

After more than fifty years of use, the original upper shock mounts on the front of your vintage Ford pickup are likely worn out, damaged or missing. These forged steel upper shock mounts are reproductions of those used on 1948-1952 Ford F1 trucks, but are also adaptable to other beam-axle hot rods. The F1 shock mounts were popular on early-style hot rods where an upgrade to telescoping shocks over lever shocks was desired.

Forged from the finest steel, these zinc-plated mounts are available in 5-1/2" or 6-1/2" lengths (measured from the centerline of the stud to the center of the top bolt hole) and accept shocks with 5/8" I.D. bushings. Hardware is included.

Forged Lower Shock Mounts, Plain
(Part #91036105)

New, FORGED steel lower shock mount design is stronger than the competition and incorporates a key slot to stop the rotation other brands suffer from. Machining of matching key slot into perch bolts may be required.  Stud for the shock eye mount is 5/8".

Axle Spring Over Illustration (Link)

Stainless Steel Upper Front Shock Bracket, Unpolished
(Part #91636004)

These trick & classy stainless steel brackets feature hidden mount bolt holes.