No items in Shopping Cart
These stainless steel bolt kits will dress up your S/B Chevy enginewhile givingitcorrosion-resistant performance. Allen head.
These stainless steel bolt kits will dress up your S/B Chevy engine while giving it corrosion-resistant performance. Hex head.
Just trim the length, weld on the 3/8" thick collector flange (included, with gaskets) and you're all set! Works great with any tight-fit headers. Header not included.
Premium stainless steel socket head bolts for your Flathead Ford tube headers. Each kit includes stainless steel AN washers.
Kit includes two weld-on mild steel V-clamp rings and a stainless steel V-band clamp. Works great for header to muffler connections.
These stainless steel mandrel bent dual exhaust kits were designed specifically forthe 1967-69 Camaro.You will not find a better engineered kit on the market. They can be adapted to any header combination but were designed to be used with Dynatech MuscleMaxx headers and reducer cones.
These stainless steel mandrel bent dual exhaust kits were designed specifically forthe 1968-72 Chevelle.You will not find a better engineered kit on the market. They can be adapted to any header combination but were designed to be used with Dynatech MuscleMaxx headers and reducer cones.
These stainless steel mandrel bent dual exhaust kits were designed specifically forthe 1968-74 Nova.You will not find a better engineered kit on the market. They can be adapted to any header combination but were designed to be used with Dynatech MuscleMaxx headers and reducer cones (at right).
Our universal 1964-1972 GM Car power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. Return hose will normally need to be cut to length.
This DOT certified brake line kit is designed to be a bolt-in for 1969-1976 GM midsize cars with original single piston front calipers and rear drum brakes. The kit includes two 16" front and one 14" rear stainless steel braided brake hoses, two banjo bolts and washers.
DOT approved brake line kits include two stainless steel-3 ANbrake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
These stainless steel braided power steering hose kits allow you to fit them to most 1965-1979 GM car & truck boxes with flare fittings.
Complete kit includes: housing, bolts, fan and pulley. Chrome plated.
We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. Inboard (high) mount brackets for early cars.
We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. Outboard mount for fat fendered cars.Alternator only kits include single groove pulleys.
We all know what a pain it is to come up with a pulley, bracket, and belt combination to work on your small block Chevy engine. We have pre-engineered our package to include the nuts, bolts, polished billet aluminum brackets and belts to make this a simple installation. Each kit also includes a new short style aluminum water pump, aluminum pulleys, one wire chrome alternator and if chosen, a chrome A/C compressor. Inboard (high) mount brackets for early cars.Alternator and A/C kits include dual groove pulleys.Bracket kit works with dual ...
Here you get the hose, hose end fittings and fuel pump fitting if required. Choose from push-on steel or aluminum fittingswith blue hose, or aluminum fittings with stainless steel braided hose. AN8 hose only.
This is a pair of steelorstainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.
This brake line kit bridges the gap between our stainless steel -3 ANkit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3ANfittings to plumb your brake lines.
Includes 20 ft. roll of steel 3/16" brake line, four 18" stainless steel braided AN 3 brake lines and common 45 degree double flare fittings to plumb your brake lines.
Choose either a tube axle or I-beam axle front suspension kit to go with your SoCalLook crossmember.Both axle kits include the axle of your choice, radius rods, spindles, spring, shocks, steering arms/rods, andall hardware.
If you are looking for that "up in the front" gasser look or just need a straight axle, we've got your deal! We can supply you a complete semi-elliptical straight axle front end kit with springs and hardware. Designed foruse withSpeedway1949-54 Chevy-style passenger car spindles.
If you are looking for that "up in the front" gasser look or just need a straight axle, we've got your deal! We can supply you a complete semi-elliptical straight axle front end kit with springs and hardware. For 1937-41 Ford style spindles.
These kits include our Gasser straight front axle, semi-elliptical springs, spindles, kingpins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 x 4-1/2" or 5 x 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and GM Metric style calipers. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.