No items in Shopping Cart
Die stamped stainless steel 1928-29 open car windshield posts. Polished.
Clean up the bed of your pickup with these smooth and highly polished stainless steel strips. Which use sliding T-bolt fasteners (sold separately) to eliminate the stock-style carriage bolts. Each universal set comes with seven strips that are 82" long.
Screen style oil windage tray for S/B Chevy engines using a stock style pan with rear sump. Ready to install.Fits 2 or 4 bolt main blocks.
Stock style glass caps fit all Model T windshields.
These stainless steel bolt kits will dress up your engine and resist corrosion. Allen head unless specified.
1932 Ford steel bolts with stainless steel bolt head cover. Requires 2 bolts per bumper.
91303822Overall Length0.750" (3/4")Thread Length0.500" (1/2")Thread Pitch1/4"-20Wrench TypeAllenInside Diameter0.250" (1/4")Outside Diameter0.490"Material Thickness0.060"Material TypeStainless SteelFinishPolishedSold in QuantitySet
Dress up your Flathead starter without spending a lot of dough. Speedway's stainless steel starter cover is easy to install and is a sure way to add a little flash to your detailed Flattie. The cover has one hole to fit over the wire connector screw on the side of your starter.
These 1-3/4" x 2-1/4" stainless steel U-bolts will keep your front or rear suspension looking sharp for years. Use anti-seize compoundto ensurethat the treads are notdamaged upon assembly.
1014001201Under Head Length0.750" (3/4")Thread Pitch3/8"-16Wrench Type12 PointMaterial TypeStainless SteelFinishPolishedSold in QuantitySetNotesWashers included, sold in a set of 12.
300-series stainless steel. One bolt head drilled for NASCAR wire seal. Hardened for accurate torquing. S/B Chevy, 12 point head, 170,000 PSI.
300-series stainless steel. One bolt head drilled for NASCAR wire seal. Harden for accurate torquing. S/B Chevy, 12 point head, 170,000 PSI.
This is the best flaring tool for the money we have found. It has a ratcheting feed screwwith ahardened flaring coneeccentricallymounted inneedle bearings which produces a rolling action for even metal flow. This provides uniform wall thickness without galling.It will put a 37 degree flare in 3/16", 1/4", 5/16", 3/8", 1/2 ", 5/8" and 3/4" tubing. We recommend this tool when flaring 3/16" stainless steel brake line.
Our 3/16" stainless steel tubingis made from304 grade (rated at 6000 psi)which is double annealedto alloweasy flaring.
Brake and fuel lines are something you should mount right the first time. Using our stainless steel clamps ensures you never have to replace them. Single clamps are available in 3/16", 1/4", 5/16" or 3/8".
Brake and fuel lines are something you should mount right the first time. Using our stainless steel clamps ensures you never have to replace them. Dual clamps have 3/16" on one end with your choice of 3/16", 1/4" or 3/8" on the other end.