No items in Shopping Cart
Sold individually.
These stainless steel headlight mounts attach to flat plate type shock mounts.Includes stainless steel bolts and hardware. Mounting bolts are 7/16".
These polished stainless steel pieces are a direct replacement for your Spike Midget.
Complete your '23T-Bucket chassis with this pre-bent Stainless Steel brake line kit. Includes all lines, proportioning valve, residual pressure valves, brake pressure switch, fittings, and hardware necessary to properly plumb the brakes on your T.
Die stamped stainless steel 1928-29 open car windshield posts. Polished.
Clean up the bed of your pickup with these smooth and highly polished stainless steel strips. Which use sliding T-bolt fasteners (sold separately) to eliminate the stock-style carriage bolts. Each universal set comes with seven strips that are 82" long.
Screen style oil windage tray for S/B Chevy engines using a stock style pan with rear sump. Ready to install.Fits 2 or 4 bolt main blocks.
Stock style glass caps fit all Model T windshields.
Beautifully polished, 1932-1936 solid stainless steel support rods for radiators. Thread covers sold separately. Rods are approx. 32" long.
Beautifully polished, 1928-1931 Model A solid stainless steel support rods for radiators. Thread covers sold separately. Rods are 26" long.
Steel radius rods for rear suspensions.Made from DOM steel tubing and includes "S"stiffener (requires welding) whichgives the arm greater strength to withstand hard acceleration.Chrome and stainless units have the stiffener welded in place. Allholes are tapped5/8" RH fine thread.
These stainless steel double adjusters can be used with female rod ends to build tie rods or other components. 1-3/4" long on each side, with 5/8"-18 LH and RH threads. 3/4" widthacross theflats.
This is the best flaring tool for the money we have found. It has a ratcheting feed screwwith ahardened flaring coneeccentricallymounted inneedle bearings which produces a rolling action for even metal flow. This provides uniform wall thickness without galling.It will put a 37 degree flare in 3/16", 1/4", 5/16", 3/8", 1/2 ", 5/8" and 3/4" tubing. We recommend this tool when flaring 3/16" stainless steel brake line.
Our 3/16" stainless steel tubingis made from304 grade (rated at 6000 psi)which is double annealedto alloweasy flaring.
Brake and fuel lines are something you should mount right the first time. Using our stainless steel clamps ensures you never have to replace them. Single clamps are available in 3/16", 1/4", 5/16" or 3/8".
Brake and fuel lines are something you should mount right the first time. Using our stainless steel clamps ensures you never have to replace them. Dual clamps have 3/16" on one end with your choice of 3/16", 1/4" or 3/8" on the other end.
Superior quality muffler clamp is 100% stainless steel. Ideal for any exhaust system. Saddle-type clamp for added strength. Choose plain or polished. Several sizes available.Thread size on clamps is 8mm-1.25.
Dyantech continues to provide the finest quality exhaust products in the industry to ensure the very best horsepower and torque gains per dollar.
These full-roller Stainless Steel rockers incorporate an exceptional lightweight design that provides plenty of clearance for large diameter springs. Manufactured from premium quality 15-5 PH stainless steel, a superior alloy high in Nickel and Chromium, this rigid material provides high yield strength to help resist deflection and has extraordinary fatigue resistance.
This stainless steel fuel fill can be flush mounted and includes a special opening key. Simple three hole mounting makes installation a snap.
A beautiful polished stainless steel clevis ideal for your hot rods' suspension! The shank features 5/8" RH fine threads. Has a3/8" wide slot and 3/8" diameter hole.
These stainless steel upper front shock mounts measure 4" from the top bolt hole to the centerline of the stud. Mounting bolts are spaced at 2-5/16" on center.Shocks bushing and stainless steel hardware is included.
91002929Center Hole to End of Shank3.250Degree of Taper7 degreeShank Diameter0.780"Shank Length2.500" (2 1/2")Thread Pitch11/16"-18Thread Length2.000"Material TypeStainless SteelFinishPolishedSold in QuantityEachNotesFit closer to the tapered hole in comparison to our plain tie rod 91002909 as they are .150" shorter.
Stainless steel fine thread jam nut for use with rod ends, heim joints, and clevis.
Lokar Hi-Tech Braided Stainless Steel Throttle Cables are designed with a specially extruded Teflonliner forunparalleled smoothness and long life.Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. "U-Cut-to-Fit" outer housing is available in 24" or 36" lengths with a "U-Cut-to-Fit" stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.