No items in Shopping Cart
This brake line kit bridges the gap between our stainless steel -3 ANkit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3ANfittings to plumb your brake lines.
You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares. This brake line kit includes a 25 foot roll of 3/16" mild steel brake line, four 18" stainless steel braided -3 ANbrake hoses, four brake line mount tabs and clips, two 3/8"-24 inverted flare T-fittings, four 3/8"-24 IFF to -3ANmale adapters, six 3/8"-24 IFF ...
Includes 20 ft. roll of steel 3/16" brake line, four 18" stainless steel braided AN 3 brake lines and common 45 degree double flare fittings to plumb your brake lines.
Use these 100% stainless steelfittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fitsframe rails 1-1/2"to 2" wide.
Use these 100% stainless steelfittings to eliminate unsightly tabs and clamps from your frame rails. Each fitting has -3 AN male threads on one end and 1/8" NPT female threads on the other. Fitsframe rails 2-1/4"to 2-3/4" wide.
Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.
DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
DOT approved brake line kits include two stainless steel -3 ANbrake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
These steel braided front brake lines are 16" overall length.They are for common 1978-88 GM metric style calipers and accept the 10mm banjo fittings on one end and have 3/8"-24 inverted flare female on the other. Stainless steel braid significantly reduces hose expansion under pressure, which results in a firmer pedal feel versus rubber hoses.