No items in Shopping Cart
Fits 1937-48 Ford style spindles. The arms attach with bolts through the lower 2 backing-plate-mounting holes on spindle.Ford arms use a 48" eye to eye tie rod link when used with a 48" wide axle /Ford spindle.
91002917Center Hole to End of Shank3.130Degree of Taper7 degreeThreadsLH FemaleThread Pitch11/16"-18Thread Length2.100"Material TypeSteelFinishChromeSold in QuantityEachNotes1-1/4" from center of threaded shaft to the bottom of the taper.
These tie rod ends are just like our standard Ford 7 taper tie rod ends except they are made of beautifully chrome plated steel. They have 11/16"-18 thread and include hardware. Make sure to use anti-seize on the threads.
These tie rod or drag link kits are pre-cut and tapped lengths of 78" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7 tie rod ends and jam nuts. Adjustable from 1/2" shorter to 3/4" longer. All lengths measured eye to eye. Tapped right-hand & left-hand threads.
These O.E.M. style steel wheels are available in a 15" diameterwith 5", 7", or 8" widths. Availablein either 5 on 4.5" (Ford/Mopar) or 5 on 4.75" (GM) wheel bolt patterns. Add spider rings and caps (sold separately) for a neat '60s style look.
Normally used with Chevy spindles. For use with flat steel steering arms. Can be used with stock type arms if drilled out to 5/8".
Normally used with '49-'54 Chevy style spindles and flat steel steering arms. Can be used with stock type Ford arms if drilled out to 5/8".
Chrome plated radius rods for rear suspensions.Made from DOM steel tubing and includes "S"stiffener whichgives the arm greater strength to withstand hard acceleration.Allholes are tapped5/8" RH fine thread.