No items in Shopping Cart
Select applicable length. AN size is the "-#" at the end of each part number.
Select applicable length. AN size is the "-#" at the end of the part number.
This 3/16" O.D. tubing is thick walled and is very easy to bend when using a lever-type tube bender. Each end has a 45 double flare with a 3/8"-24 male fitting. Seven different lengths available.
Our 3/16" stainless steel tubingis made from304 grade (rated at 6000 psi)which is double annealedto alloweasy flaring.
Stainless steel braided line available in AN6, 8, 10, and 12. This stainless line can also be used for low pressure applications like fuel, water, air or oil. Not to be used for brake or power steering applications.
Complement your -2 brake line kit by completing the system with -2 caliper lines. Durable and flexible stainless steel AN2 lines with AN3 female fittings.
DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
Complete your '23T-Bucket chassis with this pre-bent Stainless Steel brake line kit. Includes all lines, proportioning valve, residual pressure valves, brake pressure switch, fittings, and hardware necessary to properly plumb the brakes on your T.
DOT approved brake line kits include two stainless steel -3 ANbrake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
DOT approved brake line kits include two stainless steel-3 ANbrake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.
These steel braided front brake lines are 16" overall length.They are for common 1978-88 GM metric style calipers and accept the 10mm banjo fittings on one end and have 3/8"-24 inverted flare female on the other. Stainless steel braid significantly reduces hose expansion under pressure, which results in a firmer pedal feel versus rubber hoses.
This is a pair of steelorstainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.
Includes 20 ft. roll of steel 3/16" brake line, four 18" stainless steel braided AN 3 brake lines and common 45 degree double flare fittings to plumb your brake lines.
You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares. This brake line kit includes a 25 foot roll of 3/16" mild steel brake line, four 18" stainless steel braided -3 ANbrake hoses, four brake line mount tabs and clips, two 3/8"-24 inverted flare T-fittings, four 3/8"-24 IFF to -3ANmale adapters, six 3/8"-24 IFF ...
This brake kit includes Mustang II/Pinto brake componentsto fit the Track-T 1949-54 Chevy spindles. Kit features 9-1/4" rotors, rebuilt single piston calipers, pads, stainless braided AN 4 brake lines,fittings, & hardware.
This brake line kit bridges the gap between our stainless steel -3 ANkit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3ANfittings to plumb your brake lines.
Brake and fuel lines are something you should mount right the first time. Using our stainless steel clamps ensures you never have to replace them. Single clamps are available in 3/16", 1/4", 5/16" or 3/8".
This adjustable proportioning block allows you to run lines from the master cylinder to the block and then to the appropriate wheels. What is neat about it is that it also contains the proportioning valve and brake light switch.This dramatically reduces the amount of fittings needed and potential leaks.The adjustable proportioning valve regulates rear brake pressure, helping to maintain correct brake bias between front and rear brakes.It is designed for dual bowl master cylinders.The distribution block connects to the master cylinder and distributes brake fluid to all four wheels.An ...
This brake kit includes Mustang II/Pinto brake componentsto fit the'32 Lo-Boy1949-54 Chevy spindles. Kit features 9-1/4" iron rotors, rebuilt single piston calipers, pads, stainless braided AN 4 brake lines,fittings, & hardware.
Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includesbrake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steeringarms, tie rod assembly and hardware.
Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includesbrake kit, spindles, dust caps, spindle nuts, AN3 caliper fittings, Rubber Brake Lines, kingpins, flat steeringarms, tie rod assembly and hardware.
If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment.
These 3/16" mild steel "hard" lines bend easily and smoothly with hand tools, already have a double flare on each end, have male fittings threaded 3/8"-24 installed and have a 45 inverted flare.
Here's the item for added strength and durability; double wall, copper plated, steel brake line. Available in a 25' roll of 3/16" line, no nuts included.
Brake and fuel lines are something you should mount right the first time. Using our stainless steel clamps ensures you never have to replace them. Dual clamps have 3/16" on one end with your choice of 3/16", 1/4" or 3/8" on the other end.