No items in Shopping Cart
Complete your '23T-Bucket chassis with this pre-bent Stainless Steel brake line kit. Includes all lines, proportioning valve, residual pressure valves, brake pressure switch, fittings, and hardware necessary to properly plumb the brakes on your T.
This DOT certified brake line kit is designed to be a bolt-in for 1969-1976 GM midsize cars with original single piston front calipers and rear drum brakes. The kit includes two 16" front and one 14" rear stainless steel braided brake hoses, two banjo bolts and washers.
Speedway Motors is again the industry leader by offering a 100% stainless steel brake line kit. We know you don't want to cut corners on something as important as the brake system. Brake fluid and moisture in the brake lines and fittings are highly corrosive and attack softer metals.
This brake kit includes Mustang II/Pinto brake componentsto fit the Track-T 1949-54 Chevy spindles. Kit features 9-1/4" rotors, rebuilt single piston calipers, pads, stainless braided AN 4 brake lines,fittings, & hardware.
You know how frustrating it can be to try to use the OEM brake lines and hoses. Speedway makes it easy with this steel brake line kit that includes new lines and fittings to make your job easier. Use kit with 45 degree double inverted flares. This brake line kit includes a 25 foot roll of 3/16" mild steel brake line, four 18" stainless steel braided -3 ANbrake hoses, four brake line mount tabs and clips, two 3/8"-24 inverted flare T-fittings, four 3/8"-24 IFF to -3ANmale adapters, six 3/8"-24 IFF ...
This brake line kit bridges the gap between our stainless steel -3 ANkit, and our steel inverted flare version. It includes a 25 foot roll of 3/16" steel brake line, four 18" stainless steel braided hoses and enough -3ANfittings to plumb your brake lines.
Includes 20 ft. roll of steel 3/16" brake line, four 18" stainless steel braided AN 3 brake lines and common 45 degree double flare fittings to plumb your brake lines.
This brake kit includes Mustang II/Pinto brake componentsto fit the'32 Lo-Boy1949-54 Chevy spindles. Kit features 9-1/4" iron rotors, rebuilt single piston calipers, pads, stainless braided AN 4 brake lines,fittings, & hardware.
This is a pair of steelorstainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.
Wilwood's GP320 Sprint Left Front Brake kit offers increased braking torque and thermal performance of the GP320 4 piston calipers. A definitive increase in braking and durability over traditional aluminum or steel rotor systems. Mounts are included for standard Sprint spindle to match the included 10.50 x 0.19" Super Alloy rotor. Also includes Composition Metallic brake pads, lightweight aluminum dynamic mount 3-pin rotor adapter and T-nut hardware kit.
Bolt-in ultra high performance disc brake conversion kit for 1964-74 GM A, F, & X Body. Kit includes street 4-piston aluminum calipers with 45mm stainless pistons, performance brake pads, mounting brackets, 11" Big Bite cross drilled rotors, and hardware.
Cables are designed for use with Lokar Floor Mount Emergency Hand Brake (at right). Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless inner cable resists moisture.
Complete your '23T-Bucket chassis with this pre-bent Stainless Steel brake line kit.
Transmount E-Brake Cables are designed for use with Transmount Emergency Hand Brakes (at right) and includes bracket for mounting cables to hand brake. Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless steel inner cable resists moisture.
Cables are designed for use with Lokar Floor Mount & Under Dash Mount Emergency Hand Brakes. Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless inner cable resists moisture.
This emergency brake warning switch kit triggers your dash light or buzzer to alert you when your emergency brake is engaged. Kit includes a switch, stainless trigger, 2 electrical terminals, e-clip and pin and 2 mounting bolts. Works with floormount hand brake lever only (491-7000).
Complement your -2 brake line kit by completing the system with -2 caliper lines. Durable and flexible stainless steel AN2 lines with AN3 female fittings.
Lokar's under-dash emergency brake pedal offers easy operation in a clean, out of the way assembly. Mounted bracket can be adjusted to fit firewall-to-dash distances of 9 to 13 inches. Pedal arm measures 10 inches and is available with a brushed aluminum or chrome plated finish. Under-dash brake pedal works with Connector Cable kit 491-8001HT, which is available in stainless and black, and Universal Cables 491-80FU.
This hand operated emergency brake arm is the perfect solution when space is at a premium. It fits in a firewall-to-dash space as small as 11-inches and does not require the cable to enter throught the firewall. The sturdy ,easy grip handle is available in chrome or brushed aluminum finish. Hand operated brake arm works with Connector Cable kit 491-8001HT, which is available in stainless and black, and Universal Cables 491-80FU.
Spun steel hat with 5 on 4-1/2", 5 on 4-3/4" and 5 on 5" bolt circle patternsRotor: 7" bolt circle; eight holesHub with .50" diameter mounting holes; 3.00" offset; 3.06" diameter of center holeWeighs just 2 lbs. IMCA approved. 5.83" clearance I.D. Note: Axle Flanges May Require Machining for Hats
Steel rotor hat fits5on 4-1/2", 5on 4-3/4", and 5 on 5" bolt patternsand hasa 3" backspace.
Our lightweight T-bucket disc brake kit for wire wheels includes 360 degree caliper brackets, steel rotors, Wilwood aluminum single piston, floating calipers and hardware. Works with '37-'48 style Ford passenger car spindles.
Kits for metric calipers. These basic kits include brackets, steel vented rotors, hats and bolts. Caliper brackets weld to 3" tube rearend. Hat fits 4-1/2", 4-3/4" and 5" bolt circle.
This braided stainless steel line kit gives you the necessary line linking the rack to the remote reservoir canister. Line has an AN 6 female fitting on the end to work with hose kits 617-4835 and 617-4837.
These 3/8" fuel line kits have a clean look and are easy to install. Choose with or without fuel filter. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 5/16" or 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an ...
High quality stainless steel construction with black anodized fittings are pre-bent for easy plumbing of your new blower system. All kits feature an 8 AN fuel inlet with a provision for a fuel pressure gauge.
Here you get the hose, hose end fittings and fuel pump fitting if required. Choose from push-on steel or aluminum fittingswith blue hose, or aluminum fittings with stainless steel braided hose. AN8 hose only.