Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Spun Aluminum Fuel Tank, 7 Gallon, 8 x 33 Inch

Spun Aluminum Fuel Tank, 7 Gallon, 8 x 33 Inch

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These spun aluminum tanks have an unpolished, spun aluminum finish, 2-1/4" neck, and a 1/4" NPT female outlet. For all off-road vehicles. The screw-on vented cap and brackets are included and can be found in a false bottom of the packaging box.

Item Details

8" x 33"

Customer Reviews

Rated 4 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
0
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

The Bucket Guy
Phoenix AZ
Product Rating

Spun Aluminum Fuel Tanks

March 27, 2010
Looks great installation was simple. If you are going to have fuel sensor you will have to have a plate welded on the top to install the sensor. Gas cap is not a great fit it is not snug on the tank.
Pros:
  • Easy
  • Looks great installation
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1
91076253

Product Q&A

9 questions : 9 answers

1 answers

What is the total length of the tank? I have very limited room and need to know if its any more than 33". Thanks

CJ
ontario canada
June 18, 2011

What is the total length of the tank? I have very limited room and need to know if its any more than 33". Thanks

Answers

June 20, 2011
Jason
Tank is 8" in diameter and 33" long
1 answers

how much does the five gallon tank weigh?

March 20, 2011

how much does the five gallon tank weigh?

Answers

March 21, 2011
Jeremy O
The five gallon tank weighs approx. 7.24 lbs.
1 answers

will this gas tank work in a boat , Plus where are the gas outlets located, and does this tank have a breather outlet.

chuck
Albuquerque nm
February 26, 2011

will this gas tank work in a boat , Plus where are the gas outlets located, and does this tank have a breather outlet.

Answers

March 14, 2011
Waymon
These spun Aluminum tanks(p/n 91076249) are a universal mount with the brackets that are supplied with them. The last one I looked at the fuel outlet(single) was in the center on the bottom of the tank. The only other opening in this tank is the cap on the top to put fuel in them.
1 answers

how far is the filler from the end of the tank ?

rex
galt , ca
January 05, 2011

how far is the filler from the end of the tank ?

Answers

January 06, 2011
John
You inquired about the distance from the end of the tank to the filler and I have actually measured one of the larger 11 gallon ones and from the end of the tank to the center of the filler is 4 1/2'”. This is on part number: 91076256 which is our spun aluminum 11 gallon tank that measures 10” x 33”.
1 answers

How much gallons is this fuelcell

April 05, 2011

How much gallons is this fuelcell

Answers

April 05, 2011
Tech Support
Tank #91076253 is a 7 gallon tank.
1 answers

the 1/4 in. npt fitting on the tank,is it male or female thread?

brace
watertown,ny
April 16, 2011

the 1/4 in. npt fitting on the tank,is it male or female thread?

Answers

April 18, 2011
Tech Support
Female thread.
1 answers

What is the height of the fill neck? (Top of tank to top of cap)

October 26, 2011

What is the height of the fill neck? (Top of tank to top of cap)

Answers

October 27, 2011
Jason
Top of tank to top of filler neck is 1-1/4"
1 answers

Is the gas cap vented?

Curt
NM
July 27, 2011

Is the gas cap vented?

Answers

July 28, 2011
Jason
Yes, the cap is vented
1 answers

How much higher do the mounts for this tank raise it up? And can the mounts be shifted anywhere on the tank? Do you offer a longer 8" diameter tank? Thanks!

Rob
April 30, 2015

How much higher do the mounts for this tank raise it up? And can the mounts be shifted anywhere on the tank? Do you offer a longer 8" diameter tank? Thanks!

Answers

May 01, 2015
Eric
Expert
The mounting brackets shim the tank up about 3/4". The brackets can be slid to any position that you desire. Sorry we do not offer an 8" long tank.
Page 1 of 1

You may also be interested in:

Black Poly Fuel Tank, 6-1/2 Gallon, 8 x 30 Inch
(Part #91076206)
                        These black poly gas tanks include chrome mounting brackets, a screw-on cap and a 1/4" NPT threaded outlet molded into the bottom center. Care should be taken to not over-tighten fitting.
                    
Black Poly Fuel Tank, 7 Gallon, 8 x 33 Inch
(Part #91076208)
                        These black poly gas tanks include chrome mounting brackets, a screw-on cap and a 1/4" NPT threaded outlet molded into the bottom center. Care should be taken to not over-tighten fitting.
                    
Spun Aluminum Fuel Tank, 5 Gallon, 8 x 24 Inch
(Part #91076249)
                        

These spun aluminum tanks have an unpolished, spun aluminum finish, 2-1/4" neck, and a 1/4" NPT female outlet. For all off-road vehicles. The screw-on vented cap and brackets are included and can be found in a false bottom of the packaging box.

Spun Aluminum Fuel Tank, 9-1/2 Gallon, 10 x 28-1/2 Inch
(Part #91076255)
                        

These spun aluminum tanks have an unpolished, spun aluminum finish, 2-1/4" neck, and a 1/4" NPT female outlet. For all off-road vehicles. The screw-on vented cap and brackets are included and can be found in a false bottom of the packaging box.

Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Centered Outlet
(Part #91076256)
                        

These spun aluminum tanks have an unpolished, spun aluminum finish, 2-1/4" neck, and a 1/4" NPT female outlet. For all off-road vehicles. The screw-on vented cap and brackets are included and can be found in a false bottom of the packaging box.

Speedway Aluminum Tank, 4 Gallon, 8 x 20-1/2 Inch
(Part #91076402)
                        These brushed aluminum tanks are the perfect finishing touch for your pride and joy. Each has a knurled non-vented cap, two 3/8" NPT female fittings on the top and one 3/4" NPT female fitting on the bottom. Mounting brackets sold separately.
                    
7 Gallon Spun Aluminum Fuel Tank
(Part #91076248)
                        

These spun aluminum tanks have an unpolished, spun aluminum finish, 2-1/4" neck, and a 1/4" NPT female outlet. For all off-road vehicles. The screw-on vented cap and brackets are included and can be found in a false bottom of the packaging box.

  • 7 Gallon capacity
  • 10" x 22.5" size
EMPI 16-3536 Billet Aluminum 8 Inch Diameter Fuel Tank Mount, Pair
(Part #1413536)
                        

These polished billet aluminum gas tank mounts from EMPI feature a polished stainless steel strap and milled horizontal lines that match EMPI's other billet accessories.

  • Polished billet aluminum mount
  • Stainless steel straps
  • 8" diameter
  • Hardware included
  • Sold as a pair
Replacement Cap for Spun Aluminum Tanks
(Part #91076252)
                        

Replacement vented cap for spun aluminum tanks with 2-1/4" neck.

Fits the following tanks:

  • 91076249
  • 91076253
  • 91076255
  • 91076256
  • 91076257
90 Degree Flare Adaptor, AN6 to 1/4 Inch NPT
(Part #6176082)
                        

Pipe to 90° flare adaptor. 37° AN. 

Fitting Thread Application Chart (GIF)

Tank Mounting Brackets for 8 Inch Diameter Tanks
(Part #91076250)
                        

Steel tank mounting brackets for mounting 8" diameter tanks. Each tank mount has 4-3/4" bolt mount centers and is 6" wide overall at the base.