Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Speedway Hot Rod Steering Column, Custom Length

Price:$179.99
Hot Rod Steering Column - Custom Length
Price:
$179.99
EA
In Stock
Item #:
91032320
Item Details:
Specify the length from steering wheel hub to end of shaft in the Comments section of your order Check Out. Allow 3 days to ship.
Speedway Hot Rod Steering Column, Custom Length
Click image to enlarge Click image to enlarge
  • Speedway Hot Rod Steering Column, Custom Length
  • Speedway Hot Rod Steering Column, Custom Length
  • Speedway Hot Rod Steering Column, Custom Length
Watch the video below to learn more about Speedway Motors Steering Columns.

 

These steering column features a 1-3/4" polished stainless steel tube, real ball bearings for smooth shaft operation and a polished aluminum quick release hub that will accept the common Grant steering wheel 3-bolt pattern. It just doesn't get any cooler than this!

Uses the common 3/4" DD shaft and U-joints. Not for use with steering wheel centered horn button. The length is measured from where the steering wheel bolts on to where the U-joint goes on.

910-32320 Instructions (PDF) 

Note: If using a 446-4050 ball swivel mount, slight modification to the O.D. of the column end or I.D. of the swivel mount may be necessary due to a .001"-.005” variation between manufacturers. 

Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
Our Techs also Suggest the Following:
3-1/2" Steering Column Drop, 1-3/4" Hole
Price:
$68.99
EA
In Stock
Item #:
91032270
401-50619 - U-JOINT, 3/4" ROUND WELD-ON TO 3/4 DD
Price:
$59.99
EA
In Stock
Item #:
91032292
Finish: Pln
10112-00-01 - Horn Button Retainer Only
Price:
$4.99
EA
On Order
Item #:
41010112
Item Details:
Please note that this retainer will only affix a non-functional horn button onto the wheel. It is intended to be used in conjunction with a column that makes use of an external or remote horn button.
You May Also Be Interested In...
  • Speedway Hot Rod Steering Columns
    Speedway Hot Rod Steering Columns
    (3 Ratings)
    Price: $129.99 - $149.99
    More Info
    Speedway Hot Rod Steering Columns
    x 
    							                        
    
                                                        
    These steering column features a 1-3/4" polished stainless steel tube, real ball bearings for smooth shaft operation and a polished aluminum quick release hub that will accept the common Grant steering wheel 3-bolt pattern. It just doesn't get any cooler than this! 
    Uses the common 3/4" DD shaft and U-joints. Not for use with steering wheel centered horn button. 
    910-32310 Instructions (PDF) 
    Note: If using a 446-4050 ball swivel mount, slight modification to the O.D. of the column end or I.D. of the swivel mount may be necessary due to a .001"-.005” variation between manufacturers. 
  • Flaming River FR1999RO-30 30 Inch Nostalgia Steering Column, Paintable
    Flaming River FR1999RO-30 30 Inch Nostalgia Steering Column, Paintable
    Price: $399.99
    More Info
    Flaming River FR1999RO-30 30 Inch Nostalgia Steering Column, Paintable
    x 
    							                        
    
                                                        
    Our original Hot Rod Steering Column has been a huge success, but many rodders said they wanted one with a turn signal. 
    The Nostalgia Columns offer a similar vintage look but have modern GM-style turn signal, hazard light and horn functions built into the attractive bell-shaped upper housings.
    Perfect for a wide variety of 1920's through 1950's era rods, as well as Cobras and other kit cars. 
    The columns measure 30" long and have 3/4"-36 spline lower shafts. They're available with polished or paintable stainless steel housings.
  • Flaming River FR1999ROSS-30 30 Inch Nostalgia Steering Column-Polished
    Flaming River FR1999ROSS-30 30 Inch Nostalgia Steering Column-Polished
    Price: $489.99
    More Info
    Flaming River FR1999ROSS-30 30 Inch Nostalgia Steering Column-Polished
    x 
    							                        
    
                                                        
    Our original Hot Rod Steering Column has been a huge success, but many rodders said they wanted one with a turn signal. 
    The Nostalgia Columns offer a similar vintage look but have modern GM-style turn signal, hazard light and horn functions built into the attractive bell-shaped upper housings.
    Perfect for a wide variety of 1920's through 1950's era rods, as well as Cobras and other kit cars. 
    The columns measure 30" long and have 3/4"-36 spline lower shafts. They're available with polished or paintable stainless steel housings.
  • Flaming River FR20001 1-3/4 Inch Tube Floor Shift Column, Plain Finish
    Flaming River FR20001 1-3/4 Inch Tube Floor Shift Column, Plain Finish
    Price: $329.99
    More Info
    Flaming River FR20001 1-3/4 Inch Tube Floor Shift Column, Plain Finish
    x 
    							                        
    
                                                        
    Don't you wish you had a little more room than that roadster column gives you? This 30" tilt column has a 1-3/4 " tube diameter so it can replace your existing column easily. It accepts the normal '69-'94 GM steering wheel adapters, 1" DD u-joints, as well as common GM turn signal connectors.
    • All new components (not from a junkyard)
    • Made of 304 grade stainless steel tubing
    • For use with floor shifters (no column shift provisions)
    • Includes Billet Dress Up Kit (tilt/turn signal levers and hazard knob)
    • GM wiring (4-1/4" connector)
    • Made in the USA
     
  • Flaming River FR20001SS 1-3/4 Inch Tilt Floor Shift Column, Stainless
    Flaming River FR20001SS 1-3/4 Inch Tilt Floor Shift Column, Stainless
    Price: $479.99
    More Info
    Flaming River FR20001SS 1-3/4 Inch Tilt Floor Shift Column, Stainless
    x 
    							                        
    
                                                        
    Don't you wish you had a little more room than that roadster column gives you? This 30" tilt column has a 1-3/4 " tube diameter so it can replace your existing column easily. It accepts the normal '69-'94 GM steering wheel adapters, 1" DD u-joints, as well as common GM turn signal connectors.
    • All new components (not from a junkyard)
    • Made of 304 grade stainless steel tubing
    • For use with floor shifters (no column shift provisions)
    • Includes Billet Dress Up Kit (tilt/turn signal levers and hazard knob)
    • GM wiring (4-1/4" connector)
    • Made in the USA
     
  • Speedway Stainless Steel Steering Columns
    Speedway Stainless Steel Steering Columns
    (2 Ratings)
    Price: $139.99 - $159.99
    More Info
    Speedway Stainless Steel Steering Columns
    x 
    							                        
    
                                                        
    These Speedway steering columns feature a polished stainless steel housing with a 1-3/4" diameter tube and 3" bell. They work with standard 3-bolt steering wheels. Steering shaft has a 3/4" Double-D end.
    Available in multiple lengths.